Hi I have a setup where I am using a GXW4104 FXO gateway to access a GSM endpoint. With a simple dialplan, making calls works great. However, I am trying to setup a "Sequential Call Routing" where Freeswitch first tries the GSM endpoint and then uses a PSTN line instead. With the GSM line, there is always a 5 second delay before the call is made, which does not cause an issue with a simple dialplan, but when I try the a sequential Here is an example of the simple dialplan which works <extension name="Standard Call"> <condition field="destination_number" expression="^(\d{10})$"> <action application="bridge" data="sofia/internal/$1@192.168.0.160:5064" /> </condition> </extension> <extension name="Standard Call - Seq"> <condition field="destination_number" expression="^(\d{10})$"> <action application="bridge" data="{ignore_early_media=true}sofia/internal/$1@192.168.0.160:5064 | sofia/internal/$1@192.168.0.160:5060" /> </condition> </extension> What can I do to get Freeswitch to wait longer for the first endpoint or is there a better way to achieve this? Should I have two dialplans, one after another, that will execute the second if the GSM one fails? Thanks in advance O