Actually Anthony your wiki and code are accurate .. the rfc maps the translations different depending on direction. Q.850 18 = sip 408 sip 408 = Q.850 102 sip 480 = Q.850 18 Is there a way for me to access the reason header from the sip message? ----- Original Message ----- From: "Steven Ayre" <steveayre@gmail.com> To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Sent: Sunday, 9 September, 2012 5:59:22 PM Subject: Re: [Freeswitch-users] Confusion about sip hangup cause Q850 hangup cause and long struggles with a provider. Shouldn't the presence of a Reason header in the 408 from the callee override the default rfc mapping though? -Steve On 8 September 2012 22:27, Anthony Minessale <anthony.minessale@gmail.com> wrote:
I think our wiki is less accurate than our code: Our cause mappings are straight from RFC 4497 http://tools.ietf.org/html/rfc4497
Here is an excerpt:
408 Request timeout 102 Recovery on timer expiry
504 Gateway time-out 102 Recovery on timer expiry
On Fri, Sep 7, 2012 at 3:39 AM, Sias Mey <sias@cpdata.co.za> wrote:
Hi, Im sure this subject has been beaten to death .. but many googles and many email searches hasent really managed to find me something.
Im a dev for a small company that writes call center software. Freeswitch was a godsend, thank you.
Now .. the confusion.
We are getting a lot of what seem to be strange hangup codes from a new provider big fights about loads of failled calls ensued blah blah.. much sip packet logging and manual inspection later.. I found the following.
from xmlcdr.
<sip_hangup_disposition>recv_refuse</sip_hangup_disposition> <sip_term_status>408</sip_term_status> <proto_specific_hangup_cause>sip%3A408</proto_specific_hangup_cause> <sip_term_cause>102</sip_term_cause> <hangup_cause>RECOVERY_ON_TIMER_EXPIRE</hangup_cause> <hangup_cause_q850>102</hangup_cause_q850>
this just to show its the same call <sip_call_id>0d4d4e76-735a-1230-d2ac-000423b5571b</sip_call_id>
and from the sip messages.
SIP/2.0 408 Request Timeout Call-ID: 0d4d4e76-735a-1230-d2ac-000423b5571b Reason: Q.850;cause=18;text="no user responding"
And according to the very useful wiki page on Q.850 codes 408 should = 18 like it does in the providers response.
Why then is the q850 hangup cause in the CDR 102? and where does that translation come from.
This is a single example but I also have loads and loads where the CDR claims q850 code 18 but the sip messages provide 31 or a range of other codes. I can understand if the q850 code from the sip message is not being read by FS since FS has to be a bit more agnostic than that and in the pas I have almost exclusively worked with direct connections to TDM hardware so my knowledge and understanding of the sip messages is rather limited. But even in that case, shouldent the q850 code in the cdr at least conform to the translation from the wiki page?
Oh I am not currently running the latest git release, having some libtiff issues on ubuntu to compile. I will respond to this again if I manage that and it helps matters.
Thank you for your time and help, Regards Sias
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org