Thanks Moises for the clarification. That sounds good. I saw the call was neither decoding nor encoding, but I thought it was counted for the resources limit. Regards, David Notivol. 2011/4/15 Moises Silva <moises.silva@gmail.com>
On Fri, Apr 15, 2011 at 2:11 PM, David Notivol <dnotivol@gmail.com> wrote:
Thanks Michael,
We're not recording the calls passing through the D100. But we're using the FS to play some IVR's, so we're playing audios and listening for DTMF tones.
The point is, if a G729 call comes into the FS, and we play some G729 audio files, no transcoding should be needed. But, as far as I know, mod_g729 and mod_sangoma_g729 can't be loaded at the same time, so this G729-G729 call uses a Sangoma D100 session.
I don't know if there's a way of configuring FS to avoid wasting D100 resources.
As long as the decode/encode count is 0, no resources are wasted. The hardware resource is allocated only on first use. Even when you can see "sessions" created, no hardware resource has been created until FreeSWITCH requires something to encode or decode.
Moises Silva Senior Software Engineer, Software Development Manager Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON L3R 9R6 Canada t. 1 905 474 1990 x128 | e. moy@sangoma.com