Hi Peter, Make sure you use a fully qualified username not just the extension 1001@xxx.xxx.xxx.xxx the XXX would be the IP of your FreeSwitch Server. did you configure your rtmp.conf.xml and have a matching context in your dial plan? In the web page make sure these two vars are set to YOUR Freeswitch server ip: var rtmpIPURL = "rtmp://xxx.xxx.xxx.xxx/phone"; var rtmpIP="xxx.xxx.xxx.xxx"; jack On 8/6/2012 5:44 PM, Peter Steinbach wrote:
Hello,
today I tried the flex client with the mod_rtmp implementation. On a brandnew freeswitch I installed mod_rtmp and copied the flex direrectory to a web server and loaded the web page.
However the flex client does not connect: Here's my freeswitch log 2012-08-07 02:32:03.585671 [NOTICE] mod_rtmp.c:744 New RTMP session [f35a192c-0d02-4320-89e9-775a3573ee25] 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:702 Sent handshake response 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:727 Done with handshake 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:892 [chunk_stream=3 type=0x14 ts=0 stream_id=0x0] len=342 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:170 [amfnumber=3] Got INVOKE for connect 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x1 stream_id=0x0] len=4 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x5 stream_id=0x0] len=4 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x6 stream_id=0x0] len=5 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x4 stream_id=0x0] len=6 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=3 type=0x14 stream_id=0x0] len=201 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=3 type=0x14 stream_id=0x0] len=61 2012-08-07 02:32:03.685670 [NOTICE] rtmp_sig.c:121 Sent connect reply 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:892 [chunk_stream=2 type=0x5 ts=12247364 stream_id=0x0] len=4 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:945 Set window size: 131072 bytes
If I change the rtmp_url to 'rtmp://conference.freeswitch.org/phone', flex does connect.
But in my freeswitch this fails. I have traced the network traffic and I can see that there is information flow between freeswitch and the client on connect request.
Somebody has an idea where to look further?