Gilles, Sorry for the double post In your openzap.conf you need to have the span number like this [span zt FXO] name => OpenZAP fxo-channel => 29 after the span type Tom On Thu, 2010-05-27 at 16:51 -0700, GillesToo wrote:
Hello
I read the documents in the wiki, but my Dahdi + OpenZap + FXO card combo doesn't work, so I'd like to check if I made a mistake, overlooked something, or maybe some things have changed since Asterisk moved from Zaptel to Dahdi and the wiki hasn't been updated accordingly:
1. Compiled Dahdi 2.3.0, and successfully loaded it:
# /etc/init.d/dahdi status ### Span 1: WCFXO/0 "Wildcard X100P Board 1" (MASTER) RED 1 FXO FXSKS (SWEC: MG2) RED
2. vi /usr/local/freeswitch/conf/zt.conf: Nothing to do here, apparently
3. vi /usr/local/freeswitch/conf/autoload_configs/modules.conf.xml: Uncommented <load module ="mod_openzap"/>
4. vi /usr/local/freeswitch/conf/autoload_configs/openzap.conf.xml: Left default settings
5. vi /usr/local/freeswitch/conf/openzap.conf: [span zt] name => OpenZAP number => 1 fxo-channel => 1
6. The wiki says to then run fs_cli, followed by "oz list", but: "oz list: Command not found!"
Did I miss something?
Thank you for any hint.