Hi all, I'm configuring my home PBX using FreeSwitch. I'm using a X101P card configured as FXO (conected to analog PSTN line) and I have several IP phones and softphones conected to FreeSwitch. I can call from an IP phone to other IP phone (the same with the softphones) and also from an IP phone (or softphone) to an external number thought PSTN. When I call from an external analog phone to FreeSwitch, I bridge the call to all internal IP phones and softphones and they ring, but the problem is that when I hang up the call in the external phone, all internal phones (IP phones and softphones) keeps ringing... I'm pretty sure the problem is that FreeSwitch don't receive the hang up, because I cann't see anything on the log. I've also created my own tones.conf for my country (Spain) but I'm not sure if it's ok (but I have the same problem with hang up) I've googled the list, and I've found several people with a similar problem but no solution... That's my pastebin with the most importants printouts and config files: http://pastebin.freeswitch.org/6822 Thank you very much in advance.