Hi, I'm trying to migrate from Asterisk to FreeSWITCH (really like the way how it can be programmed), but ran into one issue with sound quality that I just cannot workaround by myself. I would describe the sound problem as being "choppy". From time to time small portions of the other party's voice are dropped, so the voice kind of stutters. This is not too bad, but is really noticeable, happens in every call and I don't experience the same with Asterisk running on the same box. I attached two files: freeswitch.wav and asterisk.mp3 to illustrate my point. Issue completely goes away, if I set inbound-proxy-media to true. The way how I test is to connect SPA-2000 via 10mbps LAN to the box directly exposed to internet, and then dial a toll-free via FutureNine (a SIP provider). The codec in use is PCMU. Can't really try PCMA or anything else with this provider. Only PCMU. Tried to match ptime of provider (30) with ptime of the SPA, didn't get any improvement. Tried turning off recording, no change either. What puzzles me is that even with greedy codec negotiations and with PCMU on both sides of FreeSWITCH, it's still saying that TRANSCODING_NECESSARY. I'm attaching relevant portion of freeswitch.log to illustrate. The box isn't particularly fast: Linux (Debian 4), CPU - AMD Geode LX800 with 997 bogomips. 256MB RAM. Only one call in progress, so I hope that it's not a performance issue. http://old.nabble.com/file/p26594250/freeswitch.wav freeswitch.wav http://old.nabble.com/file/p26594250/asterisk.mp3 asterisk.mp3 http://old.nabble.com/file/p26594250/freeswitch.log freeswitch.log Tried both 1.0.4 and 1.0.5pre5. Same results. What should I do next? Calls are consistently bad with FreeSWITCH, and consistently show no glitches with Asterisk. -- View this message in context: http://old.nabble.com/Choppy-sound-with-PCMU-tp26594250p26594250.html Sent from the Freeswitch-users mailing list archive at Nabble.com.