I've gotten very confused in trying to set VoicePulse up as an outgoing gateway to the PSTN, after reading all the various wiki sections about gateways and VoicePulse: 1. Added voicepulse.xml to conf/sip_profiles/default/external.. 2. edited conf/dialplan/default.xml to route 10/11 digit calls to VoicePulse. I get registered with VoicePulse OK and the gateways show up in '>sofia status' but the routing isn't working. Obviously, I'm doing something wrong but I'm at a loss at what that is. Can someone point me in the right direction? Thank you. freeswitch.log -------------- 2008-09-22 21:05:41 [DEBUG] mod_enum.c:582 enum_dialplan_hunt() ENUM Lookup on 13304535344 2008-09-22 21:05:41 [DEBUG] mod_enum.c:208 dnserror() unable to lookup NAPTR record for 4.4.3.5.3.5.4.0.3.3.1.e164.org: valid domain but no data of requested type 2008-09-22 21:05:41 [INFO] switch_core_state_machine.c:114 switch_core_standard_on_routing() No Route, Aborting 2008-09-22 21:05:41 [NOTICE] switch_core_state_machine.c:115 switch_core_standard_on_routing() Hangup sofia/internal/1000@192.168.2.2 [CS_ROUTING] [NO_ROUTE_DESTINATION] voicepulse.xml -------------- <include> <gateway name="voicepulse"> <param name="username" value="Qrq22VWD13"/> <param name="realm" value="jfk-primary.voicepulse.com"/> <param name="password" value="FQA32wvw77"/> <param name="proxy" value="nyc-primary.voicepulse.com"/> <param name="expire-seconds" value="5000"/> <param name="register" value="true"/> </gateway> <gateway name="voicepulse-backup"> <param name="username" value="Qrq24VWC12"/> <param name="realm" value="jfk-backup.voicepulse.com"/> <param name="password" value="FQU41wvx77"/> <param name="proxy" value="nyc-primary.voicepulse.com"/> <param name="extension" value="1000"/> <!-- inbound calls go to --> <param name="expire-seconds" value="5000"/> <param name="register" value="true"/> </gateway> </include> default.xml ----------- <!-- Dial any 10 digit number (2223334444) or 1+10 number (12223334444) here --> <extension name="Long Distance - voicepulse"> <condition field="destination_number" expression="^(1{0,1}\d{10})$"> <action application="set" data="effective_caller_id_number=13304535344"/> <!-- If your provider does not provide ringback (180 or 183) you may simulate ringback by uncommenting the following line. --> <!-- action application="ringback" --> <action application="bridge" data="sofia/gateway/voicepulse/$1"/> </condition> -- Jim Flowers <jflowers@ezo.net> -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.