My dialplan is pretty simple. I have a single trunk with a vonage softphone DID (1303... we'll call it main) and a "virtual" DID (1816...) which rings the softphone DID. All incoming calls show up as from softphone DID but the sip_to_user holds the actual number dialed so I can enter the dialplan properly. I have 2 extensions in my directory/extensions, one for each of the DID's. The extensions check sip_to_user for match and that works great. I match on ([0,1]?)(<10 digit did>) and it enters the dialplans correctly, plays the right music for each DID while the dial is occuring, so all that works. The bridge to user/$2@$${domain} also works fine. The continue_on_fail is set properly so on no answer call_timeout hits (at 25 secs), and goes to voicemail... works also for both numbers. transfer to voicemail is as follows <action application="answer"/> <action application="voicemail" data="default $${domain} $2"/> which should be pulling $2 from the condition check shown above, which it does, cuz the bridge works... When I call in on main DID, I get "leave a message for 1303..." The Main DID.. When I call in on virtual, I get "leave a message for 1303..." The Main DID rather than the 1816.... How can I get voicemail to use the correct DID. HELP!! :D -- View this message in context: http://www.nabble.com/Wrong---in-voicemail-tp20791453p20791453.html Sent from the Freeswitch-users mailing list archive at Nabble.com.