Thanks so much. Currently the code is all commented out. Should I leave them comment out or use the default values after removing the comments? Thanks From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Monday, August 11, 2014 3:00 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Timers The timers are defined in rfc3261. The best values to leave them at for performance is probably whatever minimum value it will allow, but calls will most definitely not work in that case. I recommend NOT changing them unless you have a specific need to change one and you understand the other endpoints and how it will effect them in all cases. On Aug 8, 2014, at 7:06 PM, Andre <andretodd@verizon.net <mailto:andretodd@verizon.net> > wrote: HI, can anyone tell me what these timers do and what are the best values to set them at for performance? <!-- <param name="timer-T1" value="500" /> --> <!-- <param name="timer-T1X64" value="32000" /> --> <!-- <param name="timer-T2" value="4000" /> --> <!-- <param name="timer-T4" value="4000" /> --> <!-- <param name="auto-jitterbuffer-msec" value="60"/> -->