I have a general question regrading MOD_LCR and the way it chooses main and failover routes ( backups ) it came out a little long , sorry for that :) I found that it difficult/impossible to make LCR use only carriers that I choose scenario is as follows , taking the UK as example for a destination ( prices are not real , just an example ) I have 2 carriers offering routes to the UK , landline and mobile my buying prices Destination carrier1 Price carrier2 price 44 (all UK) $0.01 $0.01 447 (UK mobile) $0.15 $0.19 my selling prices Destination price 44 (all UK) $0.015 447 (UKmobile) $0.17 so for UK landline both carrier 1 and carrier 2 are good for me , so I use them and be profitable for UK mobile I can ** only ** make a profit if I use carrier 1 ( if I use carrier2 I actually lose money on every calls since I sell the call for 17 cents but buy for 19 cents so I LOSE 2 cents a minute) translating it to MOD_LCR information digits rate carrier_id ( other columns ignored ) 44 0.01 1 44 0.01 2 447 0.015 1 this looks good : 44 prefix will be shared between carrier 1 and 2 447 prefix will only go to carreir 1 so it fits perfectly - BUT testing this I get - API CALL [lcr(447965404547)] output: | Digit Match | Carrier | Rate | Codec | CID Regexp | Dialstring | | 447 | carr1 | 0.15 | G711 | | [lcr_carrier=carr1,lcr_rate=1.00000,absolute_codec_string=G729]sofia/external/447965404547@10.10.10.1 | | 44 | carr2 | 0.01 | G711 | | [lcr_carrier=carr2,lcr_rate=1.00000,absolute_codec_string=G729]sofia/external/447965404547@10.10.10.2 | Notice the lcr engine is using carrier2 to route the call as backup for carrier1 , because it has coverage of that range ( 44 covers 447xxxx ) - it all makes sense ** BUT ** carrier2 should not be used for 447 range , I will lose money on each call I send there , and I actually prefer calls to fail so far I didnt find a solution for that , so if there is one I love bo pointed there I did think it over a little and came up with 2 options that could be used , and I am also planning to code them and propose patch to maintainers , I would love to get comments on those ( in case there are no existing solution ) option 1 - setting some routes as last option , add another param to the LCR table called last_route , when hitting a route with last_route=1, stop processing additional routes and return your routing decision so far so in our case the route entry with 44 to carrier1 will have last_route=1 , the other 44 routes will have last_route=0 to allow for failover option 2 - don't allow shorter prefixes , once a prefix match was found with a N digits length , do not accept less digits prefix matches. in other words dont failover from a finer route to a wider route. it will need to be a global option and I will be quite simple to use, but will require entering mutiple entries of the same length prefix for each carrier you would like to use its intutive and relatively simple to manage , but requires more lcr entries to get you where you want