Hi, i'm trying to use a Digium TDM410P with FXO device (span) So, install dahdi and create the conf as follow - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - in file /usr/local/etc/dahdi/system.conf fxsks=1 echocanceller=oslec,1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - I already try, with echocanceller MG2, KB1, and without echocanceller - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - in file /../freeswitch/conf/freetdm.conf [span zt FXO-01] trunk_type => FXO number => 9001 fxo-channel => 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - in file /../freeswitch/conf/autoload_configs/freetdm.conf.xml <span name="FXO-01"> <param name="tonegroup" value="us"/> <param name="enable-callerid" value="true"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - But, when i can't get CallerID Its, like mod_dialplan_xml.c:635 Processing unknown <unknown>->9001 in context default In headers, i don't get info 2015-09-28 21:48:20.286947 [INFO] mod_dptools.c:1681 CHANNEL_DATA: Channel-State: [CS_EXECUTE] Channel-Call-State: [RINGING] Channel-State-Number: [4] Channel-Name: [FreeTDM/1:1/9001] Unique-ID: [20ada4c7-4366-e511-a93c-bc5ff437b74f] Call-Direction: [inbound] Presence-Call-Direction: [inbound] Channel-HIT-Dialplan: [true] Channel-Call-UUID: [20ada4c7-4366-e511-a93c-bc5ff437b74f] Answer-State: [ringing] Channel-Read-Codec-Name: [PCMU] Channel-Read-Codec-Rate: [8000] Channel-Read-Codec-Bit-Rate: [64000] Channel-Write-Codec-Name: [PCMU] Channel-Write-Codec-Rate: [8000] Channel-Write-Codec-Bit-Rate: [64000] Caller-Direction: [inbound] Caller-Logical-Direction: [inbound] Caller-Username: [FreeTDM] Caller-Dialplan: [XML] Caller-Caller-ID-Name: [unknown] Caller-Caller-ID-Number: [unknown] Caller-Orig-Caller-ID-Name: [unknown] Caller-Orig-Caller-ID-Number: [unknown] Caller-ANI: [unknown] Caller-Destination-Number: [9001] I'm from Brazil, i think here the operators send number with DTMF I'm using SPA-3000, detecting CalledID, after 3º Ring. And i use SPA-3000 to receive calls and send to FreeSwitch, but i need to use TDM410P Since in TDM410P i can use 4-FXO (or 2-FXO and 2-FXS) vs 1-FXO + 1-FXS of SPA-3000. Is there another way to to grab CalledID? Is there something missing in config? Att Luiz Fernando Softov +55 67 8123 4276 http://www.softov.com.br fernando@softov.com.br