On 08/15/2013 04:59 AM, Nandy Dagondon wrote:
Hi Karl,
Did you test the milliwatt tone using the FXS port? I asked because you said it's not sending the ringing signal. Do you mean the phones did not ring. The Digium cards require a separate power supply feed. Without it - it can't generate the 100V ringing voltage. This is very obvious but let's not discounting this possibility. :-)
/Nandy
I used the tone on both fxo and fxs ports - the extra power connector is there - for some reason the gain settings in /etc/freeswitch/freetdm.conf don't seem to get applied. The key test is the output of $ dahdi_diag I just ran it again while is active to see if it makes a difference. I looks like it wants to see settings in zt.conf Which config file should this be using - zt.conf or freetdm.conf ? I can find documentation that points to both? -------------------------------------------------------------------------------- Karl Schmidt EMail Karl@xtronics.com Transtronics, Inc. WEB http://secure.transtronics.com 3209 West 9th Street Ph (785) 841-3089 Lawrence, KS 66049 FAX (785) 841-0434 Underlying most arguments against the free market is a lack of belief in freedom itself. - Milton Freidman --------------------------------------------------------------------------------