Hello, I have Polycom phones which send only RFC-2833 (or inband which I dislike) and they should go out to the PSTN via a Cisco gateway. The Cisco gateway has some bug and accepts only INFO. I did a few tests: - Some of the phones are on different profile than the Cisco. On their profile I set 'dtmf-type=rfc2833' and on the Cisco's profile I set 'dtmf-type=info' and Freeswitch did the translation. All works ok... - Some of the phones are on the same profile as the Cisco, so I must set dtmf-type to rfc2833; it works with internal applications (like voicemail) but does not work through the Cisco as it misinterprets the rfc2833 Is there a way to set some variable (or a parameter to the bridge application) to do the translation? Thanks! __Yehavi: