Hi Michael, thanks for the response. The calls terminate via SIP. I have done some reading and was was looking at the SpanDSP module with the view to amend the DTMF detection code (bit beyond me at the moment). Does this sound feasible do you think? thanks Matt On 19 March 2013 16:55, Michael Collins <msc@freeswitch.org> wrote:
One thing I didn't see in this thread was how the call terminates at your FreeSWITCH box. Is it an analog line or a SIP trunk or what?
-MC
On Fri, Mar 15, 2013 at 3:44 AM, Matt Broad <matt@inveroak.com> wrote:
Hi
after speaking to my carrier, they have told me that the tone will always be heard when sent via the PSTN. There is nothing they or BT can do to suppress the tones. Is this something that can be done within Freeswitch? To either remove the tone altogether or to replace it with something else?
thanks Matt
On 12 March 2013 19:45, Matt Broad <matt@inveroak.com> wrote:
Ok, so the fact that a tone can be heard, although only partially, would suggest inband digits are being sent too. I'll speak to my carrier and see if it is something they can supress their end. Thanks for the help and the tips on debugging :)
Thanks Matt
On Tuesday, 12 March 2013, Avi Marcus wrote:
To listen to the audio: In wireshark, go to telephony -> voip calls -> *wait a second* -> click select all -> player -> decode -> check the box for both channels -> play, to listen to the actual call.
-Avi
On Tue, Mar 12, 2013 at 5:03 PM, Matt Broad <matt@inveroak.com> wrote:
Hi Avi,
thanks for the tips, wireshark & tcpdump are great!
I have collected the PCAP file after making a call and can see the RTP events that show the tones being sent. How do I now determine if an inband tone is also being sent?
thanks Matt
On 11 March 2013 21:27, Avi Marcus <avi@avimarcus.net> wrote:
Once you get a PCAP, you can open it up in wireshark. Then, you can put in the filter: rtpevent. That will show you rfc2833 that comes in.
Then you can go to telephone -> voip calls -> *wait a second* -> click select all -> player -> decode -> check the box for both channels -> play, to listen to the actual call.
-Avi Marcus BestFone
On Mon, Mar 11, 2013 at 10:12 PM, Matt Broad <matt@inveroak.com> wrote:
Thanks Steve, thanks nick. Ill take a look at those links :)
Is there anything in particular I should be looking out for to see if any inbound is sneaking in?
Again Thanks for the help Matt
On Monday, 11 March 2013, Nick Vines wrote:
This might also help
General Debugging Freeswitch: http://wiki.freeswitch.org/wiki/Debugging_Freeswitch Packet Capture: http://wiki.freeswitch.org/wiki/Packet_Capture
On Mon, Mar 11, 2013 at 10:03 AM, Steven Ayre <steveayre@gmail.com>wrote:
PCAP is the file format used by packet capturing tools such as tcpdump, Wireshark, tshark (Wireshark's command line tool), ngrep and a host of others.
-Steve
On 11 March 2013 15:21, Matt Broad <matt@inveroak.com> wrote:
Hi Avi
thanks for your response.
Sorry I'm quite new to Freeswitch/linux, what is a PCAP? I was leaning towards it being the carrier as omitting dropt_dtmf results in the full tone being transmitted. My issue is that I cannot see how to test is this in fact the case.
Using the dialplan shown in my original emails and setting the log level to 7, when making the call I can see the DTMF tones coming in but am unsure if this is the inband being reported or the out-of band.
thanks Matt
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites <http://www.freeswitch.org>
-- Thanks Matt
This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited.
If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.
This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission.
InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
-- Thanks Matt
This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited.
If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.
This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission.
InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Michael S Collins Twitter: @mercutioviz http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Thanks Matt This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission. InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.