On Thu, Sep 2, 2010 at 6:01 PM, Mark Maly <mark.maly@molcs.org> wrote:
Hello,
Wondered why there would be an approximate 6-7 second delay in calling analog/POTS via Sangoma USB100. Have used a TDM400P and there’s a delay, but up to 7 seconds seems excessive.
Any comments?
2010-09-02 16:56:28.586905 [DEBUG] mod_freetdm.c:427 FreeTDM/1:1/xxxxxxx CHANNEL ROUTING
2010-09-02 16:56:28.586905 [DEBUG] switch_ivr_originate.c:66 (FreeTDM/1:1/xxxxxxx) State Change CS_ROUTING -> CS_CONSUME_MEDIA
2010-09-02 16:56:28.586905 [DEBUG] switch_core_session.c:1039 Send signal FreeTDM/1:1/xxxxxxx [BREAK]
2010-09-02 16:56:28.586905 [DEBUG] switch_core_state_machine.c:341 (FreeTDM/1:1/xxxxxxx) State ROUTING going to sleep
2010-09-02 16:56:28.586905 [DEBUG] switch_core_state_machine.c:314 (FreeTDM/1:1/xxxxxxx) Running State Change CS_CONSUME_MEDIA
2010-09-02 16:56:28.586905 [DEBUG] switch_core_state_machine.c:360 (FreeTDM/1:1/xxxxxxx) State CONSUME_MEDIA
2010-09-02 16:56:28.586905 [DEBUG] switch_core_state_machine.c:360 (FreeTDM/1:1/xxxxxxx) State CONSUME_MEDIA going to sleep
2010-09-02 16:56:30.264549 [DEBUG] ftmod_analog.c:720 [s1c1][1:1] Detected tone DIAL on 1:1
2010-09-02 16:56:30.284864 [DEBUG] ftdm_io.c:3041 [s1c1][1:1] Generating DTMF [xxxxxxx]
2010-09-02 16:56:30.624887 [DEBUG] ftdm_io.c:2865 [s1c1][1:1] Queuing DTMF 2
2010-09-02 16:56:31.224598 [DEBUG] ftdm_io.c:2865 [s1c1][1:1] Queuing DTMF 3
2010-09-02 16:56:34.364947 [DEBUG] ftmod_analog.c:413 [s1c1][1:1] Changed state from DIALING to UP
Please pastebin the wanpipex.conf, freetdm.conf and freetdm.conf.xml files. You can also find more interactive help in the #sangoma IRC channel Moises Silva Senior Software Engineer Sangoma Technologies Inc. | NEW 100 Renfrew Drive, Suite 100, Markham ON L3R 9R6 Canada t. 1 905 474 1990 x128 | e. moy@sangoma.com