Okay, this half-asleep mistake rectified, I ran it on the right system and got further. However, partway through the make it exited, complaining about various missing pre-reqs. (The beginning of this script claims to check for prereqs but it only seems to check for 4 or so, and I've had to re-run a bunch of other times for lots it apparently doesn't check for). Now after installing a bunch of the things it asked for, I ran into one that apparently I have to basically reset the entire installation process before it will recognize that it's there (libmemcached-dev). I tried deleting the /usr/src/freeswitch dir, which made it re-fetch everything from git. Sadly, it didn't force it to reconfigure, and now I'm getting an error " make: *** No targets specified and no makefile found. Stop." Anyone have any ideas how I can force the entire process to start over? Thanks, and sorry for the questions - this is just getting frustrating. (Removing my own bone-headed mistake from the pile, I've still been at this for 3 hours or so now...) -- Allison Walters IT Coordinator CAWST - Centre for Affordable Water and Sanitation Technology 424 Aviation Road NE, Calgary, Alberta, T2E 8H6, Canada tel: +1-403-243-3285 ext.264 web: www.cawst.org Join us in reaching 20 million people by 2020 with safe drinking water and sanitation. -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Nathan Neulinger Sent: Tuesday, December 02, 2014 11:48 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Questions before starting new install Do you have git installed on your system? Sure looks like it's complaining that you don't have it installed. -- Nathan On 12/02/2014 12:40 PM, Allison Walters wrote:
I tried that version of the script and it says it was written for 10.04 and 12.04, and it says it doesn't always work outside of that, but it'll "give it a go". And then after a bit, it failed out with a git error:
installing stable v1.4 of FreeSWITCH
/usr/bin/time: cannot run /usr/bin/git: No such file or directory
Command exited with non-zero status 127
0.00user 0.00system 0:00.00elapsed 0%CPU (0avgtext+0avgdata 1220maxresident)k
0inputs+0outputs (0major+27minor)pagefaults 0swaps
./install_fusionpbx.sh: line 1114: cd: /usr/src/freeswitch: No such file or directory
./install_fusionpbx.sh: line 1115: /usr/bin/git: No such file or directory
GIT ERROR
I suspect this is because freeswitch moved to stash in July, apparently. Anyway, I'll see if I can find anyone on the Fusion forum or IRC or somewhere that can help with this part. Thanks!
--
*Allison Walters*
/IT Coordinator/
CAWST - Centre for Affordable Water and Sanitation Technology
424 Aviation Road NE, Calgary, Alberta, T2E 8H6, Canada
tel: +1-403-243-3285 ext.264
web: www.cawst.org <http://www.cawst.org/>
*//*
*/Join us in reaching 20 million people by 2020 with safe drinking water and sanitation. /*
*From:*freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Moishe Grunstein *Sent:* Monday, December 01, 2014 9:37 PM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] Questions before starting new install
1)FusionPBX renames Freeswitch default configs after installation, it uses and then creates its own XML files (unless you use their XML handler which writes to db instead). If you then modify XML files directly, the next time you make a change in the GUI they will overwrite your changes. They have an IRC channel #FusionPBX and they use googlecode for svn and issue tracker..
2)Not sure what scripts you are referring to be dated, FusionPBX scripts have been last modified this month http://fusionpbx.googlecode.com/svn/trunk/scripts/install/ubuntu/insta ll_fusionpbx.sh
Thanks,
Moishe Grunstein
Tornado Computer Systems, Inc.
212.400.7650 888.IPPBX.US *Service Request Email: support@nysolutions.com <mailto:support@nysolutions.com> *
Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified
cid:image001.jpg@01C72F94.9EE45D60 <http://www.nysolutions.com/>
Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS
*From:*freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Allison Walters *Sent:* Monday, December 1, 2014 8:51 PM *To:* freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org> *Subject:* Re: [Freeswitch-users] Questions before starting new install
Whoops - accidentally had mail delivery disabled. So I'll respond to Moishe's points with a manual reply/quote:
1) You cannot migrate a working freeswitch to FusionPBX. You would need to recreate all the configs in the FusionPBX web interface.
I didn't change anything - they were both already installed. Mind you, I don't know how the person who installed it did it; maybe that's related to the issues they were seeing? Regardless, the Fusion interface seems to read all of the correct info, including when things are changed in the XML files (which is how I was encouraged to do changes.). Now, I'm confused - Fusion keeps its own copy of the config files? It's not just a wrapper that modifies the existing freeswitch ones? (Just going off what I was told.)
2) Ubuntu install is the same as debian https://freeswitch.org/confluence/display/FREESWITCH/Debian if you are going with fusionpbx you would be better off with one of their scripts.
I looked at their script, but it didn't seem to have been updated since 2012, which makes me a bit nervous. I'll take another peek, though.
3) If you are staying with native freeswitch, you can copy over almost all configs to the new server. What version are you migrating from?
The current server is running 1.3.0.
Thanks!
--
*Allison Walters*
/IT Coordinator/
CAWST - Centre for Affordable Water and Sanitation Technology
424 Aviation Road NE, Calgary, Alberta, T2E 8H6, Canada
tel: +1-403-243-3285 ext.264
web: www.cawst.org <http://www.cawst.org/>
*//*
*/Join us in reaching 20 million people by 2020 with safe drinking water and sanitation. /*
From: *Allison Walters* <AWalters@cawst.org <mailto:AWalters@cawst.org>> Date: Mon, Dec 1, 2014 at 3:50 PM Subject: [Freeswitch-users] Questions before starting new install To: "freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org>" <freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org>>
We're wanting to replace our current freeswitch server (it's fairly old), and I have a few things I'm curious about before I start trying to build the new one. I inherited the current one and am relatively unfamiliar to all of this, so I appreciate your patience.
1.I was told by the consultant that set up the current box that freeswitch doesn't play well with fusionpbx or really any of the GUI's - there have been instances (and indeed one happened a couple of months ago while I was here) of the config files getting randomly overwritten with old settings, which supposedly is the fault of trying to run fusion. Also I was told it doesn't provide nice clean XML, etc. I was strongly encouraged to go with no GUI. If it were just me, I'd be okay with that, but we have a couple of other people who might be helping to maintain the server and they're far more comfortable with GUIs. Has anyone else had any of these issues, and/or have any recommendations on the subject?
2.I'm trying to install on Ubuntu. When I go to the wiki, I get this page: https://freeswitch.org/confluence/display/FREESWITCH/Linux , which just gives an apt-get line for Ubuntu. However, that line just seems to have pre-reqs and not freeswitch itself. Anyone know where I could find current Ubuntu instructions? I googled but the most recent pages I could find were from 2012, and most were from 2011. Is that the most up to date?
3.Are there any guidelines for migration from an old server running an old version to a new server with a current version?
Thank you!
--
*Allison Walters*
/IT Coordinator/
CAWST - Centre for Affordable Water and Sanitation Technology
424 Aviation Road NE, Calgary, Alberta, T2E 8H6, Canada
tel: +1-403-243-3285 ext.264 <tel:%2B1-403-243-3285%20ext.264>
web: www.cawst.org <http://www.cawst.org/>
*//*
*/Join us in reaching 20 million people by 2020 with safe drinking water and sanitation. /*
______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
-- ------------------------------------------------------------ Nathan Neulinger nneul@mst.edu Missouri S&T Information Technology (573) 612-1412 System Administrator - Architect _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org