Sorry no personal experience :( was just trying to help you understand they may be two separate causes if you didn't already know. For example, muting a phone will probably (unless specifically configured on the device not to) send SOME RTP/media data. It will just be audibly silent. As opposed to hold, in which you adjust SDP data (as your friend said) to indicate what's going on (eg. A will send to B but B will not send back or vice versa..). When FS receives a re-invite with adjust SDP it should respond with a 200OK to indicate that it's all fine. So I'd run a trace and check FS is sending a 200OK back. in summary: Something on SFB is timing out here. You need to find out what that is (SFB logs?) On Thu, May 5, 2016 at 1:34 PM, jay binks <jaybinks@gmail.com> wrote:
I've seen similar things in both scenarios ( hold & mute ) but don't recall the specifics of each scenario. I can potentially gather more info tomorrow.
Have you experienced the same things that I'm seeing ? ( have you found fixes ? )
Jay On May 5, 2016 9:37 PM, "Benjamin Cropley" <benjamin.cropley@gmail.com> wrote:
Hi Jay,
Can you clarify whether this issue only happens when you push mute on a SFB device or only when pushing the 'hold' key? Or both? (both are treated slightly differently in SIP).
Ben
On Thu, May 5, 2016 at 11:56 AM, jay binks <jaybinks@gmail.com> wrote:
Hi All,
Im hoping that the collective experience of the FS Community might be able to help with some interop fun with Skype For Business, specifically where the SFB end sends a bye at around 3 min, after the call has been on hold for ( for most of that time )
I dont see anything obvious in the signalling, but a colleague who is quite experienced with Lync feels it may be related to how we are handling "a=inactive" when the call is on hold.
I cant at this point share any of these SIP traces ( mainly because im yet to have this entire scenario tested in our lab ).
I guess what Im asking is, does anyone have SFB working well with Freeswitch, and have you tested long periods of silence ( pressing mute in the SFB client ) and long periods of the call on hold.
if so, can you potentially share any settings you had to tweak in order to make this work.
Sincerely
Jay
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org