Hello All, I am working on migrating our call system from FreeSWITCH 1.0.6 to 1.2.7. The setup is as follows: * CallerDevice registered with Remote FreeSWITCH * CalleeDevice registered with Local FreeSWITCH * Local FreeSWITCH and Remote FreeSWITCH are in different subnets I have a C application which is connected to, and interacts with FreeSWITCH. On receiving a call from Remote FreeSWITCH on Local FreeSWITCH, the call is parked, and then a couple of Lua scripts are executed: 1. first one sends an INVITE to the callee device via freeswitch interface, which makes the callee device to ring 2. Once the call is accepted on the device, a second script executes, which calls the uuid_bridge applicaiton to bridge the parked call UUID and the callee UUID However, most of the times (it does work a few times), the call establishment fails with a DESTINATION_OUT_OF_ORDER error. This exact setup, when run with the 1.0.6 version, works without any glitches. When I peeped through the code, I see that, the call state of the callee leg, after going into HIBERNATE STATE, never recovers, because of which the call times out in the method uuid_bridge_on_soft_execute(), and throws this error. In case of the 1.0.6 version, this doesn't happen, and 'State Change CS_HIBERNATE -> CS_RESET' takes place, and the call continues. The uuid_bridge_on_hibernate() handler, for some reason, doesn't seem to be getting called. Would appreciate any inputs on how to resolve this.. I probably need to update my application to work with 1.2.7 version, but am not sure! Logs at : http://pastebin.freeswitch.org/20800 Thanks!