Hi guys. I've noticed today that the originate_timeout on a sequence like dialstring is not respected. originate {originate_timeout=12,domain_name=domain.example.com }[leg_delay_start=0,leg_timeout=10]user/999@domain.example.com |[leg_delay_start=0,leg_timeout=10]user/997@domain.example.com |[leg_delay_start=0,leg_timeout=10]user/998@domain.example.com &park() In a case like this all the endpoints are called and the call ends only after 30 sec with the disposition ALLOTED_TIMEOUT from the last target. Although if I set originate_timeout in the same dialstring let's say to 7 seconds the call ends after 7 seconds with a NO ANSWER disposition (in this case the originate_timeout is indeed respected). originate {originate_timeout=7,domain_name=domain.example.com }[leg_delay_start=0,leg_timeout=10]user/999@domain.example.com |[leg_delay_start=0,leg_timeout=10]user/997@domain.example.com |[leg_delay_start=0,leg_timeout=10]user/998@domain.example.com &park() Should I open a jira for this? Cheers, -- *Nuno Miguel Reis* | *Unified Communication** Systems* M. +351 913907481 | nreis@wavecom.pt WAVECOM-Soluções Rádio, S.A. Cacia Park | Rua do Progresso, Lote 15 3800-639 AVEIRO | Portugal T. +351 309 700 225 | F. +351 234 919 191 *GPS <http://maps.google.com/maps/ms?msa=0&msid=202333747613191340808.0004b4b227a6144f0df88> | www.wavecom.pt <http://www.wavecom.pt/>** <http://www.wavecom.pt/>* <http://www.wavecom.pt/> <http://www.wavecom.pt/pt/>