Unfortunately this didn't help... Incoming calls from ISDN to SIP sends back to ISDN the name of the destination, but not the other way around... Thanks! __Yehavi: 2009/12/3 Metik <freeswitch-users-list@metik.com>
Yehavi,
There are a few variations of transmitting this information... If you have already enabled a supplemental isdn service profile, try adding the following to the PRI you are using:
(config-if)#isdn outgoing ie facility (config-if)#iisdn outgoing ie extended-facility (config-if)#isdn outgoing display-ie (config-if)#isdn outgoing ie caller-number (config-if)#isdn outgoing ie called-number
-metik
Yehavi Bourvine wrote:
Hello,
We have a Cisco running IOS 12.4T used as our SIP-PRI gateway. On the PRI there is a Nortel with Q.Sig. After a lot of configuration trials I've managed to set it to send back the connected name over the SIP (i.e. when a call goes from SIP to PRI, the PRI sends back the connected name and then the Cisco adds it as a Remote-Party-ID). However, I did not save it and a power outage cleared this config. In my age I don't remember what I've done...
Anyone knows the correct config?
Thanks! __Yehavi: ------------------------------------------------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org