Hi all, i have a problem with A101 sangoma pri card. I spent couple of days trying to make it work but alas... My problem is that i can't load mod_freetdm module. I'm sure i'm doing something wrong, but i can't find out what is my mistake... So.. please help to solve the problem... I setup my test system according to http://wiki.freeswitch.org/wiki/FreeTDM I use freeswitch 1.0.7, wanpipe 3.5.18 and libsng_isdn-7.0.0. wanrouter can see the card: [root@sipx4 conf]# wanrouter hwprobe ------------------------------- | Wanpipe Hardware Probe Info | ------------------------------- 1 . AFT-A101-SH : SLOT=4 : BUS=8 : IRQ=177 : CPU=A : PORT=1 : HWEC=32 : V=37 Card Cnt: A101-2=1 [root@sipx4 conf]# wanrouter status Devices currently active: wanpipe1 Wanpipe Config: Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate | wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 177 | 4 | 1 | N/A | 0 | Wanrouter Status: Device name | Protocol | Station | Status | wanpipe1 | AFT TE1 | N/A | Connected | Here is my config files: [root@sipx4 conf]# cat /etc/wanpipe/wanpipe1.conf #================================================ # WANPIPE1 Configuration File #================================================ # # Date: Wed Dec 6 20:29:03 UTC 2006 # # Note: This file was generated automatically # by /usr/local/sbin/setup-sangoma program. # # If you want to edit this file, it is # recommended that you use wancfg program # to do so. #================================================ # Sangoma Technologies Inc. #================================================ [devices] wanpipe1 = WAN_AFT_TE1, Comment [interfaces] w1g1 = wanpipe1, , TDM_VOICE_API, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 4 PCIBUS = 8 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = MASTER TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO TE_RX_SLEVEL = 430 LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 TE_AIS_MAINTENANCE = NO #NO: defualt YES: Start port in AIS Blue Alarm and keep line down #wanpipemon -i w1g1 -c Ttx_ais_off to disable AIS maintenance mode #wanpipemon -i w1g1 -c Ttx_ais_on to enable AIS maintenance mode TDMV_HW_DTMF = YES # YES: receive dtmf events from hardware TDMV_HW_FAX_DETECT = YES # YES: receive fax 1100hz events from hardware HWEC_OPERATION_MODE = OCT_NORMAL # OCT_NORMAL: echo cancelation enabled with nlp (default) # OCT_SPEECH: improves software tone detection by disabling NLP (echo possible) # OCT_NO_ECHO:disables echo cancelation but allows VQE/tone functions. HWEC_DTMF_REMOVAL = NO # NO: default YES: remove dtmf out of incoming media (must have hwdtmf enabled) HWEC_NOISE_REDUCTION = NO # NO: default YES: reduces noise on the line - could break fax HWEC_ACUSTIC_ECHO = NO # NO: default YES: enables acustic echo cancelation HWEC_NLP_DISABLE = NO # NO: default YES: guarantees software tone detection (possible echo) HWEC_TX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio level to be maintained (-20 default) HWEC_RX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio level to be maintained (-20 default) HWEC_TX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal HWEC_RX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal [w1g1] ACTIVE_CH = ALL TDMV_HWEC = YES MTU = 80 [root@sipx4 conf]# [root@sipx4 conf]# cat /usr/local/freeswitch-107/conf/wanpipe.conf (i installed FS into /usr/local/freeswitch-107) [defaults] codec_ms => 20 wink_ms => 150 flash_ms => 750 [root@sipx4 conf]# cat /usr/local/freeswitch-107/conf/freetdm.conf [span wanpipe wp1] trunk_type => e1 group=1 b-channel => 1:1-15 b-channel => 1:17-31 d-channel => 1:16 [root@sipx4 conf]# cat /usr/local/freeswitch-107/conf/autoload_configs/freetdm.conf.xml <configuration name="freetdm.conf" description="Freetdm Configuration"> <settings> <param name="debug" value="0"/> <!--<param name="hold-music" value="$${moh_uri}"/>--> <!--<param name="enable-analog-option" value="call-swap"/>--> <!--<param name="enable-analog-option" value="3-way"/>--> </settings> <config_profiles> <profile name="my_pri_nt_1"> <param name="switchtype" value="euroisdn" /> <param name="interface" value="net"/> </profile> </config_profiles> <sangoma_pri_spans> <span name="wp1" cfgprofile="my_pri_nt_1"> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </sangoma_pri_spans> <analog_spans> </analog_spans> </configuration> [root@sipx4 conf]# The other side of the E1 connection is mediant 2000 E1 port. Mediant shows d-channel alarm. And here is what i got in the log, when tried to load module: [freeswitch107@sipx4 log]$ cat freeswitch.log.2011-01-21-10-24-01.1 2011-01-21 10:23:15.775934 [NOTICE] mod_logfile.c:158 New log started. 2011-01-21 10:23:57.495838 [INFO] mod_enum.c:808 ENUM Reloaded 2011-01-21 10:23:57.495838 [INFO] switch_time.c:954 Timezone reloaded 530 definitions 2011-01-21 10:23:57.495838 [DEBUG] ftdm_config.c:52 New mod directory: /usr/local/freeswitch-107/mod 2011-01-21 10:23:57.495838 [DEBUG] ftdm_config.c:58 New config directory: /usr/local/freeswitch-107/conf 2011-01-21 10:23:57.495838 [DEBUG] ftdm_sched.c:154 Initializing scheduling API 2011-01-21 10:23:57.495838 [DEBUG] ftdm_sched.c:251 Created schedule freetdm-master 2011-01-21 10:23:57.495838 [NOTICE] ftdm_sched.c:178 Launching main schedule thread 2011-01-21 10:23:57.495838 [DEBUG] ftdm_sched.c:187 Running schedule freetdm-master in the main schedule thread 2011-01-21 10:23:57.495838 [DEBUG] ftdm_config.c:80 Configuration file is /usr/local/freeswitch-107/conf/modules.conf. 2011-01-21 10:23:57.495838 [NOTICE] ftdm_io.c:5731 Modules configured: 1 2011-01-21 10:23:57.495838 [DEBUG] ftdm_config.c:80 Configuration file is /usr/local/freeswitch-107/conf/freetdm.conf. 2011-01-21 10:23:57.495838 [DEBUG] ftdm_io.c:4676 Reading FreeTDM configuration file 2011-01-21 10:23:57.495838 [DEBUG] ftdm_io.c:4692 found config for span 2011-01-21 10:23:57.495838 [INFO] ftdm_io.c:4976 Loading IO from /usr/local/freeswitch-107/mod/ftmod_wanpipe.so [wanpipe] 2011-01-21 10:23:57.495838 [DEBUG] ftdm_config.c:80 Configuration file is /usr/local/freeswitch-107/conf/wanpipe.conf. 2011-01-21 10:23:57.495838 [INFO] ftdm_io.c:800 Auto-loaded I/O module 'wanpipe' 2011-01-21 10:23:57.495838 [DEBUG] ftdm_io.c:4706 created span 1 (wp1) of type wanpipe 2011-01-21 10:23:57.495838 [DEBUG] ftdm_io.c:4722 span 1 [trunk_type]=[e1] 2011-01-21 10:23:57.495838 [DEBUG] ftdm_io.c:4727 setting trunk type to 'E1' 2011-01-21 10:23:57.495838 [DEBUG] ftdm_io.c:4722 span 1 [group]=[1] 2011-01-21 10:23:57.495838 [DEBUG] ftdm_io.c:4722 span 1 [b-channel]=[1:1-15] 2011-01-21 10:23:57.495838 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 1 2011-01-21 10:23:57.495838 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 2 2011-01-21 10:23:57.495838 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 3 2011-01-21 10:23:57.495838 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 4 2011-01-21 10:23:57.495838 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 5 2011-01-21 10:23:57.495838 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 6 2011-01-21 10:23:57.495838 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 7 2011-01-21 10:23:57.495838 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 8 2011-01-21 10:23:57.495838 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 9 2011-01-21 10:23:57.495838 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 10 2011-01-21 10:23:57.495838 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 11 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 12 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 13 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 14 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 15 2011-01-21 10:23:57.497841 [ERR] ftdm_io.c:4623 1:Failed to configure span2011-01-21 10:23:57.497841 [DEBUG] ftdm_io.c:4722 span 1 [b-channel]=[1:17-31] 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 17 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 18 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 19 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 20 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 21 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 22 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 23 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 24 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 25 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 26 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 27 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 28 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 29 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 30 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 31 2011-01-21 10:23:57.497841 [ERR] ftdm_io.c:4623 1:Failed to configure span2011-01-21 10:23:57.497841 [DEBUG] ftdm_io.c:4722 span 1 [d-channel]=[1:16] 2011-01-21 10:23:57.497841 [ERR] ftmod_wanpipe.c:246 Failed to open wanpipe device span 1 channel 16 2011-01-21 10:23:57.497841 [ERR] ftdm_io.c:4623 1:Failed to configure span2011-01-21 10:23:57.497841 [INFO] ftdm_io.c:4901 Configured 0 channel(s) 2011-01-21 10:23:57.497841 [ERR] ftdm_io.c:5741 FreeTDM global configuration failed! 2011-01-21 10:23:57.497841 [ERR] mod_freetdm.c:4181 Error configuring FreeTDM 2011-01-21 10:23:57.497841 [CRIT] switch_loadable_module.c:928 Error Loading module /usr/local/freeswitch-107/mod/mod_freetdm.so **Module load routine returned an error** 2011-01-21 10:23:57.597841 [NOTICE] ftdm_sched.c:147 Main scheduling thread going out ... [freeswitch107@sipx4 log]$ Can anybody please help with the problem? I'm ready to provide additional info if needed. Thanks and regards, Nikolay.