Hi Guys. Current setup is a FS box with a Digium TE122 installed, with DAHDI kernel drivers and using FreeTDM with a libpri span... == autoload_configs/freetdm.conf.xml == <configuration name="freetdm.conf" description="FreeTDM Configuration"> <settings> <param name="debug" value="0"/> <param name="sip_headers" value="true"/> </settings> <libpri_spans> <span name="ISDN"> <param name="mode" value="user"/> <param name="dialect" value="q931"/> <param name="dialplan" value="XML"/> <param name="context" value="public"/> </span> </libpri_spans> </configuration> == freetdm.conf == [general] cpu_monitor => yes cpu_monitoring_interval => 1000 cpu_set_alarm_threshold => 80 cpu_reset_alarm_threshold => 70 cpu_alarm_action => warn [span zt ISDN] trunk_type => E1 b-channel => 1-15 d-channel => 16 b-channel => 17-21 == zt.conf == [defaults] codec_ms => 20 wink_ms => 150 flash_ms => 750 echo_cancel_level => 128 rxgain => 0.0 txgain => 0.0 == /etc/dahdi/system.conf == span=1,1,0,ccs,hdb3,crc4 # termtype: te bchan=1-15,17-31 dchan=16 echocanceller=mg2,1-15,17-31 # Global data loadzone = au defaultzone = au ========= And finally some logs from two calls, a successful one, and a failed one... http://pastebin.freeswitch.org/15533 If anyone could offer any suggestions as to what I can do to answer every incoming call into the box that would very appreciated. Of course if I need to provide more information I am willing to, and any suggestions for settings that need changing to test out will also be great. Thank you in advance Matt