GillesToo, What is the output of "dahi_scan" can you post your openzap.conf.xml file I run wanpipe , dahdi and openzap with libpri Tom On Fri, 2010-05-28 at 04:41 -0700, GillesToo wrote:
Troy Anderson-2 wrote:
oz list will only work if openzap is loaded, so that's a clue that it isn't for some reason. Try issuing reload mod_openzap from the cli and take a look at the output. There is likely an error on load, and that error may lead you to what's wrong with the config.
Thanks for the tip. Here's what "reload mod_openzap" returns:
freeswitch@internal> load mod_openzap -ERR [module load file routine returned an error]
freeswitch@internal> 2010-05-28 12:13:51.138275 [DEBUG] zap_config.c:56 Configuration file is /usr/local/freeswitch/conf/modules.conf. 2010-05-28 12:13:51.138275 [NOTICE] zap_io.c:3057 Modules configured: 1 2010-05-28 12:13:51.139297 [DEBUG] zap_config.c:56 Configuration file is /usr/local/freeswitch/conf/openzap.conf. 2010-05-28 12:13:51.139297 [DEBUG] zap_io.c:2587 found config for span 2010-05-28 12:13:51.139297 [NOTICE] ozmod_zt.c:1185 Using DAHDI control device 2010-05-28 12:13:51.139297 [ERR] ozmod_zt.c:1194 Cannot open control device /dev/dahdi/ctl: Permission denied 2010-05-28 12:13:51.140310 [ERR] zap_io.c:2856 Error loading /usr/local/freeswitch/mod/ozmod_zt.so 2010-05-28 12:13:51.140310 [ERR] zap_io.c:2901 Unloading /usr/local/freeswitch/mod/ozmod_zt.so 2010-05-28 12:13:51.140310 [CRIT] zap_io.c:2610 failure creating span, no such type 'zt' 2010-05-28 12:13:51.140310 [INFO] zap_io.c:2782 Configured 0 channel(s) 2010-05-28 12:13:51.140310 [ERR] zap_io.c:3065 No modules configured! 2010-05-28 12:13:51.140310 [ERR] mod_openzap.c:3331 Error loading OpenZAP 2010-05-28 12:13:51.140310 [CRIT] switch_loadable_module.c:882 Error Loading module /usr/local/freeswitch/mod/mod_openzap.so **Module load routine returned an error**
BTW, before I investigate further... I notice that the two articles in the wiki about OpenZap are based on Zaptel (1.4), whose development stopped two years ago when Zaptel was replaces with Dadhi:
http://wiki.freeswitch.org/wiki/OpenZAP http://wiki.freeswitch.org/wiki/Zaptel_Tutorial
Has someone successfully used OpenZap with Dahdi, and if yes, are there any changes that should be made in OpenZap to accomodate this change?
Thank you.