I reread your post and you are correct. been a long time for me working with E&M guess I am getting old as I didn't recognize what you had said until I reread it. Easy enough to Google it or if a person has access to almost any copy of the "Notes on the Networks". A good description is included in any version of that documenrt as well as other places. Take care, Dennis Hock -----Robert Dyck <rob.dyck@telus.net> wrote: ----- To: freeswitch-users@lists.freeswitch.org From: Robert Dyck <rob.dyck@telus.net> Date: 08/22/2008 11:40AM cc: Dennis D Hock <hockd@dteenergy.com> Subject: Re: [Freeswitch-users] T1 RBS Support Revisited I messed up. The E lead receives signalling whereas the M lead is used to send to the far end. On Friday 22 August 2008, Dennis D Hock wrote:
Rob I believe you have the grasp of RBS. It has nothing to do with MF or the type of signaling per se but rather the encoding of the signaling as you have described it here.
Dennis Hock
-----freeswitch-users-bounces@lists.freeswitch.org wrote: -----
To: freeswitch-users@lists.freeswitch.org From: Robert Dyck <rob.dyck@telus.net> Sent by: freeswitch-users-bounces@lists.freeswitch.org Date: 08/21/2008 11:08PM Subject: Re: [Freeswitch-users] T1 RBS Support Revisited
If RBS means robbed bit signalling then it is transmitted in the media bit stream but as the name implies it is not used for media. If I remember correctly the LSB from every sixth frame is robbed leaving 7 bits and 1 faked which would probably be correct about 50% of the time. RBS introduces a small amount of distortion. The channel bank will use the state of the signalling bit to set the M lead (on or offhook ) of the appropriate channel. The E lead sets the signalling bit for the other direction. Think Ear and Mouth.
MF of course is encoded into the bit stream the same as any other audio source. To avoid RBS, on/offhook can be transmitted using SF ( 2600 HZ ) in band. You would want to disable RBS in that case. Compatible equipment is required obviously.
On Thursday 21 August 2008, Brian West wrote:
Isn't RBS more than just MF? Unless I'm forgetting something you rob a bit.
/b
On Aug 21, 2008, at 7:44 PM, John Wehle wrote:
Is there support in FreeSWITCH for MF?
To answer my own question ...
Perhaps I can add a ZAP_COMMAND_SEND_MF case to zap_channel_command patterned after ZAP_COMMAND_SEND_DTMF and just use teletone_set_tone to set the proper frequencies???
-- John ----------------------------------------------------------------------- --
| Feith Systems | Voice: 1-215-646-8000 | Email:
john@feith.com |
| John Wehle | Fax: 1-215-540-5495
----------------------------------------------------------------------- --
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-user s http://www.freeswitch.org
Brian West sip:brian@freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org