Thank you Michael, this works. However, the phone being called starts ringing a good 3 seconds before the ring audio is generated on the line. Any idea how to start the ring audio at the same time, or at least minimize the delay? I tried setting "instant_ringback=true" and it didn't make any difference. On 3/19/14, 2:10 PM, Michael Jerris wrote:
https://wiki.freeswitch.org/wiki/Variable_ringback
On Mar 19, 2014, at 4:01 PM, Pete Ashdown <pashdown@xmission.com <mailto:pashdown@xmission.com>> wrote:
I'm using Freeswitch as a PSTN gateway behind a Kamailio SIP proxy. I get no ringback audio if call a phone in this direction:
(PSTN freetdm) -> Freeswitch -> Kamailio -> Phone (registered to Kamailio)
Debugging it, I see that SIP 180 ringing is sent from the phone to Kamailio, and then relayed properly to Freeswitch, which does recognize the ring, but because there is no RTP audio associated with it, has nothing to send into freetdm.
So my question is how do I turn SIP 180 into ringback audio generated on the PSTN gateway itself?