Hi This question pertains libss7 with Sangoma A108 card on Asterisk. It does not concern freeswitch but I suppose Sangoma folks frequent this list more :) I am unable to make libss7 work with Sangoma. Here are the details. Could you please provide me some pointers ? Thanks, Anita. debian:~# uname -a Linux debian 2.6.26-2-686 #1 SMP Thu Nov 25 01:53:57 UTC 2010 i686 GNU/Linux debian:~# dahdi_hardware pci:0000:05:04.0 wanpipe- 1923:0100 Sangoma Technologies Corp. A104d QUAD T1/E1 AFT card pci:0000:07:04.0 wanpipe- 1923:0100 Sangoma Technologies Corp. A104d QUAD T1/E1 AFT card debian:~# cat /etc/dahdi/system.conf #autogenerated by /usr/sbin/wancfg_dahdi do not hand edit #autogenrated on 2011-01-03 #Dahdi Channels Configurations #For detailed Dahdi options, view /etc/dahdi/system.conf.bak loadzone=us defaultzone=us #Sangoma A108 port 1 [slot:4 bus:5 span:1] <wanpipe1> span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 echocanceller=mg2,1-15,17-31 mtp2=16 #Sangoma A108 port 2 [slot:4 bus:5 span:2] <wanpipe2> span=2,1,0,ccs,hdb3,crc4 bchan=32-46,48-62 echocanceller=mg2,32-46,48-62 mtp2=47 debian:~# cat /etc/wanpipe/wanpipe1.conf #============================= =================== # WANPIPE1 Configuration File #================================================ # # Date: Wed Dec 6 20:29:03 UTC 2006 # # Note: This file was generated automatically # by /usr/local/sbin/setup-sangoma program. # # If you want to edit this file, it is # recommended that you use wancfg program # to do so. #================================================ # Sangoma Technologies Inc. #================================================ [devices] wanpipe1 = WAN_AFT_TE1, Comment [interfaces] w1g1 = wanpipe1, , TDM_VOICE, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 4 PCIBUS = 5 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 TDMV_HW_DTMF = NO TDMV_HW_FAX_DETECT = NO [w1g1] ACTIVE_CH = ALL TDMV_HWEC = NO debian:~# cat /etc/wanpipe/wanpipe2.conf #================================================ # WANPIPE1 Configuration File #================================================ # # Date: Wed Dec 6 20:29:03 UTC 2006 # # Note: This file was generated automatically # by /usr/local/sbin/setup-sangoma program. # # If you want to edit this file, it is # recommended that you use wancfg program # to do so. #================================================ # Sangoma Technologies Inc. #================================================ [devices] wanpipe2 = WAN_AFT_TE1, Comment [interfaces] w2g1 = wanpipe2, , TDM_VOICE, Comment [wanpipe2] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 4 PCIBUS = 5 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 2 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 2 TDMV_DCHAN = 16 TDMV_HW_DTMF = NO TDMV_HW_FAX_DETECT = NO [w2g1] ACTIVE_CH = ALL TDMV_HWEC = NO debian:~# cat /etc/asterisk/chan_dahdi.conf ;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit ;autogenrated on 2011-01-03 ;Dahdi Channels Configurations ;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak [trunkgroups] [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no ;Sangoma A108 port 1 [slot:4 bus:5 span:1] <wanpipe1> switchtype=euroisdn context=tata group=1 echocancel=yes signaling=ss7 ;this is ss7 signaling ss7type=itu ;using the ITU variant ss7_called_nai=dynamic ;NAI for outgoing calls ss7_calling_nai=dynamic ;NAI for incoming calls ss7_internationalprefix=00 ;international prefix value for incoming calls ss7_nationalprefix=0 ;national prefix value for incoming calls ss7_subscriberprefix= ;subscriber prefix value for incoming calls ss7_unknownprefix= ;unknown prefix value for incoming calls ss7_explictacm=yes ;ACM is send as soon as call enters the dial plan...may not accepted yet though linkset=1 ;arbitrary name for this set of channels pointcode=13323 ;the point code for this system...aka SPC adjpointcode=12650 ;the point code for the system that we are signaling to... aka APC defaultdpc=12650 ;the point code for the system that the CICs will be negotiated with...aka DPC networkindicator=international ;NI value for MTP3 cicbeginswith=1 ;the starting value of the CICs channel =>1-15 cicbeginswith=17 ;the starting value of the CICs channel =>17-31 ;the channels that are CICs sigchan=16 ;the signaling channel ;Sangoma A108 port 2 [slot:4 bus:5 span:2] <wanpipe2> switchtype=euroisdn context=tata group=1 echocancel=yes cicbeginswith=32 ;the starting value of the CICs channel =>32-46 cicbeginswith=48 ;the starting value of the CICs channel =>48-62 ;the channels that are CICs sigchan=47 ;the signaling channel debian:~# ifconfig w1g1 w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:772814 errors:0 dropped:0 overruns:0 frame:0 TX packets:772814 errors:0 dropped:0 overruns:3 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff debian:~# ifconfig w1g1 w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:774782 errors:0 dropped:0 overruns:0 frame:0 TX packets:774782 errors:0 dropped:0 overruns:3 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff debian:~# ifconfig w1g1 w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:775351 errors:0 dropped:0 overruns:0 frame:0 TX packets:775351 errors:0 dropped:0 overruns:3 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff debian:~# ifconfig w1g1 w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:775919 errors:0 dropped:0 overruns:0 frame:0 TX packets:775919 errors:0 dropped:0 overruns:3 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff debian:~# ifconfig w1g1 w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:776478 errors:0 dropped:0 overruns:0 frame:0 TX packets:776478 errors:0 dropped:0 overruns:3 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff debian:~# ifconfig w1g1 w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:777079 errors:0 dropped:0 overruns:0 frame:0 TX packets:777079 errors:0 dropped:0 overruns:3 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff debian:~# ifconfig w1g1 w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:778134 errors:0 dropped:0 overruns:0 frame:0 TX packets:778134 errors:0 dropped:0 overruns:3 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff debian:~# ifconfig w2g1 w2g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:792251 errors:0 dropped:0 overruns:0 frame:0 TX packets:792251 errors:0 dropped:0 overruns:1 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff debian:~# ifconfig w2g1 w2g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:792715 errors:0 dropped:0 overruns:0 frame:0 TX packets:792715 errors:0 dropped:0 overruns:1 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff debian:~# ifconfig w2g1 w2g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:793219 errors:0 dropped:0 overruns:0 frame:0 TX packets:793219 errors:0 dropped:0 overruns:1 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff wanpipemon -i w2g1 -c Ta ***** w2g1: E1 Alarms (Framer) ***** ALOS: OFF | LOS: OFF RED: OFF | AIS: OFF LOF: OFF | RAI: OFF ***** w2g1: E1 Alarms (LIU) ***** Short Circuit: OFF Open Circuit: OFF Loss of Signal: OFF ***** w2g1: E1 Performance Monitoring Counters ***** Line Code Violation : 0 Far End Block Errors : 0 CRC4 Errors : 0 FAS Errors : 0 Rx Level : > -2.5db debian:~# wanpipemon -i w1g1 -c Ta ***** w1g1: E1 Alarms (Framer) ***** ALOS: OFF | LOS: OFF RED: OFF | AIS: OFF LOF: OFF | RAI: OFF ***** w1g1: E1 Alarms (LIU) ***** Short Circuit: OFF Open Circuit: OFF Loss of Signal: OFF ***** w1g1: E1 Performance Monitoring Counters ***** Line Code Violation : 371 Far End Block Errors : 0 CRC4 Errors : 0 FAS Errors : 0 Rx Level : > -2.5db Jan 3 20:33:34 debian kernel: [55441.172179] wanpipe1: Shutting Down! Jan 3 20:33:34 debian kernel: [55441.172179] wanpipe1: E1 Front End unconfigation! Jan 3 20:33:34 debian kernel: [55441.172179] wanpipe1: Unregister Wanpipe device from Zaptel! Jan 3 20:33:34 debian kernel: [55441.178246] wanpipe1: unregistering 'w1g1' Jan 3 20:33:34 debian kernel: [55441.248278] wanpipe1: TASKQ Not Running Jan 3 20:33:34 debian kernel: [55441.248281] wanpipe1: E1 Front End unconfigation! Jan 3 20:33:34 debian kernel: [55441.248314] wanpipe1: AFT communications disabled! (Dev Cnt: 1 Cause: Device Down) Jan 3 20:33:34 debian kernel: [55441.248335] wanpipe1: E1 Front End unconfigation! Jan 3 20:33:34 debian kernel: [55441.248373] wanpipe1: AFT communications disabled! (Dev Cnt: 1 Cause: Device Down) Jan 3 20:33:34 debian kernel: [55441.248415] wanpipe1: Global Chip Shutdown Usage=1 Jan 3 20:33:34 debian kernel: [55441.248419] wanpipe1: Global E1 Front End unconfigation! Jan 3 20:33:34 debian kernel: [55441.250485] wanpipe1: Master shutting down Jan 3 20:33:34 debian kernel: [55441.444571] wanpipe1: Starting WAN Setup Jan 3 20:33:34 debian kernel: [55441.444575] wanpipe1: Locating: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=5 Jan 3 20:33:34 debian kernel: [55441.444579] wanpipe1: Found: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=5, Port=0 Jan 3 20:33:34 debian kernel: [55441.444599] wanpipe1: AFT PCI memory at 0xD3200000 Jan 3 20:33:34 debian kernel: [55441.444600] wanpipe1: IRQ 16 allocated to the AFT PCI card Jan 3 20:33:34 debian kernel: [55441.444608] wanpipe1: Starting AFT 2/4/8 Hardware Init. Jan 3 20:33:34 debian kernel: [55441.444614] wanpipe1: Enabling front end link monitor Jan 3 20:33:34 debian kernel: [55441.444616] wanpipe1: Global Chip Configuration: used=1 Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Global E1 Front End configuration Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: AFT Data Mux Bit Map: 0x01234567 Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Defaulting E1 Rx Sens. Gain= 43 db Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Configuring DS DS26528 E1 FE Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Port 1,HDB3,non-CRC4,120OH Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Clk Normal:0, Channels: FFFFFFFF Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Sig Mode CCS Jan 3 20:33:34 debian kernel: [55441.456490] wanpipe1: Rx Sensitivity Gain 43dB (default). Jan 3 20:33:34 debian kernel: [55441.457242] wanpipe1: Front end successful Jan 3 20:33:34 debian kernel: [55441.457469] wanpipe1: Front End Interface Ready 0x40000000 Jan 3 20:33:34 debian kernel: [55441.457473] wanpipe1: WARNING: No Echo Canceller channels are available! Jan 3 20:33:34 debian kernel: [55441.457494] wanpipe1: Configuring Device :wanpipe1 FrmVr=39 Jan 3 20:33:34 debian kernel: [55441.457495] wanpipe1: Global MTU = 1500 Jan 3 20:33:34 debian kernel: [55441.457496] wanpipe1: Global MRU = 1500 Jan 3 20:33:34 debian kernel: [55441.457497] wanpipe1: Data Mux Map = 0x01234567 Jan 3 20:33:34 debian kernel: [55441.457498] wanpipe1: Rx CRC Bytes = 0 Jan 3 20:33:34 debian kernel: [55441.457499] wanpipe1: Global TDM Int = Enabled Jan 3 20:33:34 debian kernel: [55441.457500] wanpipe1: Global TDM Ring = Enabled Jan 3 20:33:34 debian kernel: [55441.457501] wanpipe1: TDMV HW DTMF/FAX = Disabled/Disabled(0) Jan 3 20:33:34 debian kernel: [55441.457502] wanpipe1: TDMV Span = 1 : Enabled Jan 3 20:33:34 debian kernel: [55441.457503] wanpipe1: TDMV Dummy = Disabled Jan 3 20:33:34 debian kernel: [55441.457505] wanpipe1: RTP TAP = Disabled Jan 3 20:33:34 debian kernel: [55441.457540] wanpipe1: Configuring Interface: w1g1 Jan 3 20:33:34 debian kernel: [55441.457543] wanpipe1:w1g1: Running in TDM Voice Zaptel Mode. Jan 3 20:33:34 debian kernel: [55441.457547] wanpipe1: Fifo Level Map:0x01041040 Jan 3 20:33:34 debian kernel: [55441.457549] wanpipe1: MRU :8 Jan 3 20:33:34 debian kernel: [55441.457550] wanpipe1: MTU :8 Jan 3 20:33:34 debian kernel: [55441.457551] wanpipe1: HDLC Eng :Off (Transparent) | N/A Jan 3 20:33:34 debian kernel: [55441.457553] wanpipe1: Data Mux Ctrl :On Jan 3 20:33:34 debian kernel: [55441.457554] wanpipe1: Active Ch Map :0x00000002 Jan 3 20:33:34 debian kernel: [55441.457555] wanpipe1: First TSlot :1 Jan 3 20:33:34 debian kernel: [55441.457568] wanpipe1: DMA/Len/Chain/EC :4/1024/Off/Off Jan 3 20:33:34 debian kernel: [55441.457575] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457581] wanpipe1: Active Ch Map :0x00000004 Jan 3 20:33:34 debian kernel: [55441.457582] wanpipe1: First TSlot :2 Jan 3 20:33:34 debian kernel: [55441.457597] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457602] wanpipe1: Active Ch Map :0x00000008 Jan 3 20:33:34 debian kernel: [55441.457603] wanpipe1: First TSlot :3 Jan 3 20:33:34 debian kernel: [55441.457618] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457623] wanpipe1: Active Ch Map :0x00000010 Jan 3 20:33:34 debian kernel: [55441.457624] wanpipe1: First TSlot :4 Jan 3 20:33:34 debian kernel: [55441.457637] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457643] wanpipe1: Active Ch Map :0x00000020 Jan 3 20:33:34 debian kernel: [55441.457644] wanpipe1: First TSlot :5 Jan 3 20:33:34 debian kernel: [55441.457657] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457663] wanpipe1: Active Ch Map :0x00000040 Jan 3 20:33:34 debian kernel: [55441.457664] wanpipe1: First TSlot :6 Jan 3 20:33:34 debian kernel: [55441.457678] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457684] wanpipe1: Active Ch Map :0x00000080 Jan 3 20:33:34 debian kernel: [55441.457685] wanpipe1: First TSlot :7 Jan 3 20:33:34 debian kernel: [55441.457698] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457705] wanpipe1: Active Ch Map :0x00000100 Jan 3 20:33:34 debian kernel: [55441.457706] wanpipe1: First TSlot :8 Jan 3 20:33:34 debian kernel: [55441.457719] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457725] wanpipe1: Active Ch Map :0x00000200 Jan 3 20:33:34 debian kernel: [55441.457726] wanpipe1: First TSlot :9 Jan 3 20:33:34 debian kernel: [55441.457740] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457746] wanpipe1: Active Ch Map :0x00000400 Jan 3 20:33:34 debian kernel: [55441.457747] wanpipe1: First TSlot :10 Jan 3 20:33:34 debian kernel: [55441.457760] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457765] wanpipe1: Active Ch Map :0x00000800 Jan 3 20:33:34 debian kernel: [55441.457766] wanpipe1: First TSlot :11 Jan 3 20:33:34 debian kernel: [55441.457781] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457786] wanpipe1: Active Ch Map :0x00001000 Jan 3 20:33:34 debian kernel: [55441.457787] wanpipe1: First TSlot :12 Jan 3 20:33:34 debian kernel: [55441.457801] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457807] wanpipe1: Active Ch Map :0x00002000 Jan 3 20:33:34 debian kernel: [55441.457808] wanpipe1: First TSlot :13 Jan 3 20:33:34 debian kernel: [55441.457822] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457828] wanpipe1: Active Ch Map :0x00004000 Jan 3 20:33:34 debian kernel: [55441.457829] wanpipe1: First TSlot :14 Jan 3 20:33:34 debian kernel: [55441.457842] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457848] wanpipe1: Active Ch Map :0x00008000 Jan 3 20:33:34 debian kernel: [55441.457849] wanpipe1: First TSlot :15 Jan 3 20:33:34 debian kernel: [55441.457862] wanpipe1: Configuring Interface: w1g1 Jan 3 20:33:34 debian kernel: [55441.457864] wanpipe1:w1g1: Running in TDM DCHAN Voice Zaptel Mode. Jan 3 20:33:34 debian kernel: [55441.457866] wanpipe1: MRU :1500 Jan 3 20:33:34 debian kernel: [55441.457867] wanpipe1: MTU :1500 Jan 3 20:33:34 debian kernel: [55441.457868] wanpipe1: HDLC Eng :On | N/A Jan 3 20:33:34 debian kernel: [55441.457869] wanpipe1: Data Mux Ctrl :Off Jan 3 20:33:34 debian kernel: [55441.457870] wanpipe1: Active Ch Map :0x00010000 Jan 3 20:33:34 debian kernel: [55441.457871] wanpipe1: First TSlot :16 Jan 3 20:33:34 debian kernel: [55441.457881] wanpipe1: DMA/Len/Chain/EC :65/4096/On/Off Jan 3 20:33:34 debian kernel: [55441.457905] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457910] wanpipe1: Active Ch Map :0x00020000 Jan 3 20:33:34 debian kernel: [55441.457911] wanpipe1: First TSlot :17 Jan 3 20:33:34 debian kernel: [55441.457925] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457931] wanpipe1: Active Ch Map :0x00040000 Jan 3 20:33:34 debian kernel: [55441.457932] wanpipe1: First TSlot :18 Jan 3 20:33:34 debian kernel: [55441.457945] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457951] wanpipe1: Active Ch Map :0x00080000 Jan 3 20:33:34 debian kernel: [55441.457952] wanpipe1: First TSlot :19 Jan 3 20:33:34 debian kernel: [55441.457967] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457973] wanpipe1: Active Ch Map :0x00100000 Jan 3 20:33:34 debian kernel: [55441.457974] wanpipe1: First TSlot :20 Jan 3 20:33:34 debian kernel: [55441.457987] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457993] wanpipe1: Active Ch Map :0x00200000 Jan 3 20:33:34 debian kernel: [55441.457994] wanpipe1: First TSlot :21 Jan 3 20:33:34 debian kernel: [55441.458009] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458015] wanpipe1: Active Ch Map :0x00400000 Jan 3 20:33:34 debian kernel: [55441.458016] wanpipe1: First TSlot :22 Jan 3 20:33:34 debian kernel: [55441.458030] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458036] wanpipe1: Active Ch Map :0x00800000 Jan 3 20:33:34 debian kernel: [55441.458037] wanpipe1: First TSlot :23 Jan 3 20:33:34 debian kernel: [55441.458051] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458057] wanpipe1: Active Ch Map :0x01000000 Jan 3 20:33:34 debian kernel: [55441.458058] wanpipe1: First TSlot :24 Jan 3 20:33:34 debian kernel: [55441.458072] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458078] wanpipe1: Active Ch Map :0x02000000 Jan 3 20:33:34 debian kernel: [55441.458079] wanpipe1: First TSlot :25 Jan 3 20:33:34 debian kernel: [55441.458094] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458100] wanpipe1: Active Ch Map :0x04000000 Jan 3 20:33:34 debian kernel: [55441.458101] wanpipe1: First TSlot :26 Jan 3 20:33:34 debian kernel: [55441.458116] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458122] wanpipe1: Active Ch Map :0x08000000 Jan 3 20:33:34 debian kernel: [55441.458123] wanpipe1: First TSlot :27 Jan 3 20:33:34 debian kernel: [55441.458137] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458143] wanpipe1: Active Ch Map :0x10000000 Jan 3 20:33:34 debian kernel: [55441.458144] wanpipe1: First TSlot :28 Jan 3 20:33:34 debian kernel: [55441.458160] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458166] wanpipe1: Active Ch Map :0x20000000 Jan 3 20:33:34 debian kernel: [55441.458167] wanpipe1: First TSlot :29 Jan 3 20:33:34 debian kernel: [55441.458181] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458187] wanpipe1: Active Ch Map :0x40000000 Jan 3 20:33:34 debian kernel: [55441.458188] wanpipe1: First TSlot :30 Jan 3 20:33:34 debian kernel: [55441.458202] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458205] wanpipe1: Configuring TDMV Master dev w1g1 Jan 3 20:33:34 debian kernel: [55441.458209] wanpipe1: Active Ch Map :0x80000000 Jan 3 20:33:34 debian kernel: [55441.458210] wanpipe1: First TSlot :31 Jan 3 20:33:34 debian kernel: [55441.458226] wanpipe1: Enable Zaptel HW DCHAN interface Jan 3 20:33:34 debian kernel: [55441.458462] wanpipe1: Wanpipe device is registered to Zaptel span # 1! Jan 3 20:33:34 debian kernel: [55441.458760] wanpipe1: TDM Free Run Timing Enabled 1 ms Jan 3 20:33:34 debian kernel: [55441.464708] wanpipe1: Wanpipe Front End Interrupt Restart Timeout Jan 3 20:33:40 debian kernel: [55450.402880] wanpipe1: E1 connected! Jan 3 20:33:40 debian kernel: [55450.407421] wanpipe1: AFT communications enabled! Jan 3 20:33:40 debian kernel: [55450.407421] wanpipe1: AFT Global TDM Intr Jan 3 20:33:40 debian kernel: [55450.409902] wanpipe1: Global TDM Ring Resync Jan 3 20:33:41 debian kernel: [55452.785733] wanpipe1: Enable E1 CCS Signalling mode! debian*CLI> core show version Asterisk 1.6.2.0 built by root @ debian on a i686 running Linux on 2011-01-03 08:57:50 UTC debian*CLI> ss7 show linkset 1 SS7 linkset 1 status: Down debian*CLI> ss7 set debug off linkset 1 Enabled debugging on linkset 1 Len = 4 [ ff ff 01 03 ] FSN: 127 FIB 1 BSN: 127 BIB 1 <[0] LSSU SIOS Link state change: NOTALIGNED -> NOTALIGNED Len = 4 [ ff ff 01 00 ] FSN: 127 FIB 1 BSN: 127 BIB 1 <[0] LSSU SIO Link state change: NOTALIGNED -> ALIGNED Len = 4 [ ff ff 01 02 ] FSN: 127 FIB 1 BSN: 127 BIB 1
[0] LSSU SIE
Link state change: ALIGNED -> IDLE Link state change: IDLE -> NOTALIGNED Len = 4 [ ff ff 01 00 ] FSN: 127 FIB 1 BSN: 127 BIB 1
[0] LSSU SIO