Hi! Both are auto-nat: <param name="ext-rtp-ip" value="auto-nat"/> <param name="ext-sip-ip" value="auto-nat"/> FreeSWITCH Version 1.0.trunk (15490) However, isn't it the IP address that is reported by the remote SPA3102 that is incorrect? Or? On Thu, Dec 31, 2009 at 7:21 AM, Brian West <brian@freeswitch.org> wrote:
show me the ext-rtp-ip and ext-sip-ip settings you're using along with SVN rev please.
/b
On Dec 30, 2009, at 2:13 PM, Mark Campbell-Smith wrote:
Hi Anthony,
The only profiles I have defined are external and internal. These should be using internal...
192.168.1.120 is the FS box, which is NAT'd. Never had any problems with this being NAT'd though 192.168.1.121 is a PAP2 ATA connected to FS
I don't use proxy media.
I am trying to call an SPA3102, which is on the internet and NAT'd (external IP address 11.11.11.11 in the trace and internal/private ip address of 192.168.1.3).
Thanks!
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org