On Wed, Mar 3, 2021 at 4:12 AM Lewis Bergman <lewis.bergman@gmail.com> wrote:
Hello all. I am pretty new to Freeswitch and have an experimental container on Proxmox 6.3 Debian 10 to play with. The goal is to get mod_unimrcp working. To that end, I have mod_tts_commandline (installed from binary with FusionPBX as part of the default install) listed in modules.conf.xml /etc/freeswitch/autoload_configs/modules.conf.xml <!-- Speech Recognition / Text to Speech --> <load module="mod_unimrcp"/> <load module="mod_tts_commandline"/> <load module="mod_flite"/> I have tried it with and without mod_flite enabled. Mod_tts_commandline refuses to pull a sound file and the debug log seems to blame mod_sndfile. This is using the example from the mod_tts_commandline page < https://freeswitch.org/confluence/display/FREESWITCH/mod_tts_commandline#mod...
as dialplan shows following the debug log output below:
2021-02-26 15:19:24.713040 [NOTICE] mod_dptools.c:1406 Channel [sofia/internal/102@66.151.243.45] has been answered 2021-02-26 15:19:24.713040 [DEBUG] switch_channel.c:3865 (sofia/internal/ 102@66.151.243.45) Callstate Change RINGING -> ACTIVE 2021-02-26 15:19:24.713040 [DEBUG] sofia.c:7326 Channel sofia/internal/ 102@66.151.243.45 entering state [completed][200] EXECUTE [depth=0] sofia/internal/102@66.151.243.45 speak(tts_commandline|pico|This is an example of using tts_commandline) 2021-02-26 15:19:24.713040 [DEBUG] switch_ivr_play_say.c:3023 OPEN TTS tts_commandline 2021-02-26 15:19:24.713040 [DEBUG] switch_ivr_play_say.c:3033 Raw Codec Activated 2021-02-26 15:19:24.713040 [DEBUG] mod_tts_commandline.c:160 Executing: echo 'This is an example of using tts_commandline' | text2wave -f 8000 > '/tmp/0665a30d-2bb8-40fe-b5a6-9625bd58306e.tmp.wav' 2021-02-26 15:19:25.433013 [WARNING] mod_sndfile.c:281 Error Opening File [/tmp/0665a30d-2bb8-40fe-b5a6-9625bd58306e.tmp.wav] [File contains data in an unknown format.] 2021-02-26 15:19:25.433013 [ERR] mod_tts_commandline.c:170 Failed to open file: /tmp/0665a30d-2bb8-40fe-b5a6-9625bd58306e.tmp.wav
Since your goal is to use mod_unimrcp I think you should not spend your time with mod_tts_commandline. Anyway, what do you get when you run these in the bash shell: which text2wave echo 'This is an example of using tts_commandline' | text2wave -f 8000 > test.wav file test.wav ls -l test.wav Did you install festival? (text2wave comes with it)