OK. Can't help beyond that point - only know about the lmsensors bit having used it a fair amount on Debian/Ubuntu systems. I don't use mod_snmp (yet). John On 17/02/12 17:34, Spencer Thomason wrote:
Yes, it doesn't seem to be related to just that. That was one line. I have included the complete log of errors and warnings when reloading mod_snmp:
http://pastebin.freeswitch.org/18429
On Feb 17, 2012, at 9:01 AM, John wrote:
When you installed Debian, did you `apt-get install lm-sensors` and run sensors-detect?
On 17/02/12 16:55, Spencer Thomason wrote:
Hello, We are using mod_snmp to provide data to a graphing utility for switch stats. Recently we switched from Centos 5.6 to Debian Squeeze. I'm now seeing several WARNING messages similar to the following when mod_snmp is loaded or restarted. Everything seems to be working as it should however, the warnings were a little concerning.
An example: 2012-02-06 16:14:06.822536 [WARNING] mod_snmp.c:70 Cannot adopt OID in LM-SENSORS-MIB: lmSensorsMIB ::= { lmSensors 1 }
Any ideas? and is it something to worry about?
Thanks, Spencer