Hello, I have had great success bringing up Freeswitch in my lab with various makes/models of SIP hardware CPE, and I am starting to delve into some more complex scenarios. I have two questions specific to Cisco's current generation IP handsets (7965/7945): 1. Is integration of busy lamp fields working on the Cisco 7945/7965? It seems the Asterisk folks are in the process of putting a patch together for 1.6 that uses SIP TCP as a path way, and that Cisco may have some "extensions" required to make them work. If they are supported on Freeswitch, could someone post an XML phone / corresponding Freeswitch directory.xml configuration that is known working? I've attempted what I think is correct based on the SIP deployment guides and the Wiki's, but my BLF speed dial buttons and call logs do not show any presence information. <callLogBlfEnabled>1</callLogBlfEnabled> - tried 1 and 2 here <line button="5"> <featureID>21</featureID> <featureLabel>Phil 5000</featureLabel> <speedDialNumber>5000</speedDialNumber> </line> 2. Is it possible to send a dialed name from Freeswitch back to the IP phone as feedback when a number is dialed out, similar to native CallManager Express/UCM functionality? I've noticed that my Linksys SPA962 will support this without any configuration changes required. This behavior seems to be vendor implementation specific - I'm not sure where this information is hiding so I can't refer to it by it's SIP header to ask as an educated question. I appreciate any help or guidance you can give me, even if it's RTFM :) Thanks folks. Regards, Pat