Nevermind, I’ve fixed the problem. The inbound EslConnection I created was registered for myevents <aleg_uuid>. I was also sending the uuid_kill on this object. Removed the myevents and the divert_events on command and now the call gets killed. From: Grant Bagdasarian Sent: Monday, May 19, 2014 10:40 AM To: FreeSWITCH Users Help Subject: RE: [Freeswitch-users] How to hangup a call which is in a parked state Nevermind this, I executed this before the channel was answered. What I did found out is the ESLevent object the Bgapi method returns is null. Executing uuid_kill directly in fs cli works. So, I’m probably using the wrong command or format. Any pointers? From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Grant Bagdasarian Sent: Monday, May 19, 2014 10:25 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] How to hangup a call which is in a parked state I tried executing the uuid_kill <uuid> command directly in the FS cli. uuid_kill 51559706-df2e-11e3-b13b-cf4c73e7bd03 16 OR uuid_kill 51559706-df2e-11e3-b13b-cf4c73e7bd03 It resulted into: -ERR No such channel! I get the UUID from the Unique-ID header. Using FS version 1.2.13. From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Grant Bagdasarian Sent: Monday, May 19, 2014 9:22 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] How to hangup a call which is in a parked state Hello Ian, I tried it, but it also doesn’t work (nothing shown in fs_cli output). Someone explained to me to use Bgapi or Api method when executing mod_commands commands, so I did. This method is being executed. private void uuidKill(ESLconnection connection, string uuid) { connection.Bgapi("uuid_kill", uuid, ""); } I also tried, without any success: connection.Bgapi("uuid_kill " + uuid, "16", ""); I’m using Outbound ESL to pass call control to my C# application. The application then play some stuff to the caller, collects input, acts on it etc. It then reaches a point where it has to bridge to an remote destination and upon connection they get to talk to each other for a limited amount of minutes. Once this limit has been reached, the c# application steps in does a uuid_transfer to park both calls and perform playback on both uuid’s. Before the uuid_transfer I’m creating a new ESLconnection (inbound mode) to FS which registers for events for the a leg’s uuid and I create a new Task which listens for hangup of the a leg. So far this works. When the CHANNEL_HANGUP/CHANNEL_HANGUP_COMPLETE event has been received for the a leg, I send a command to FS using the inbound ESL socket connection. But the command never gets executed in FS. The connection is up, .Connected() returns 1. Did I use the uuid_kill command in a wrong way? Regards, Grant From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ian McMaster Sent: Friday, May 16, 2014 4:23 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] How to hangup a call which is in a parked state Grant, uuid_kill <uuid> will 'hangup' a call in a parked state. On Fri, May 16, 2014 at 9:54 AM, Grant Bagdasarian <GB@cm.nl<mailto:GB@cm.nl>> wrote: Hello, How do I hangup a call which is currently in a parked state? Documentation https://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_park says: - Set caller in a place where the channel won't be hungup on, while waiting for someone to talk to. Does this mean I can’t hang up a channel that is in a parked state? I’m using the ESL library and I’ve tried different things: - ESLconnection Execute Hangup - SendMSG Hangup - Uuid_transfer to extension which hangs up the call None of them work. I also don’t see the action back in the fs_cli output. The call was in a bridged state with another channel (inbound channel). After a few minutes I performed a uuid_transfer to park both calls, then uuid_broadcast to both calls to play a different prompt to each leg. Then I hangup the inbound channel by hanging up the phone, and the outbound channel remains in parked state. I have no idea how to force this channel to be hung up as well. Any ideas? _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org