[devices] wanpipe1 = WAN_AFT_TE1, Comment
[interfaces] wp1aft1 = wanpipe1, auto, API, Comment wp1aft2 = wanpipe1, auto, API, Comment
[wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 4 PCIBUS = 5 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO TE_RX_SLEVEL = 120 LBO = 120OH TE_SIG_MODE = CCS FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_HW_DTMF = NO
[wp1aft1] HDLC_STREAMING = NO ACTIVE_CH = 1-15.17-31 IDLE_FLAG = 0x7E MTU = 240 MRU = 240 DATA_MUX = NO TDMV_HWEC = NO
[wp1aft2] HDLC_STREAMING = YES ACTIVE_CH = 16 MTU = 1500 MRU = 1500 DATA_MUX = NO TDMV_HWEC = NO
I'm no BRI expert but it looks to me like your wanpipe is set up for E1/EuroISDN. Where did you get this setup information? -MC