Please try latest openzap (svn update in libs/openzap). I commited some code that may help you. -- Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy@sangoma.com On Thu, Feb 25, 2010 at 7:13 PM, Robert Hadley <robert.hadley@teotech.com>wrote:
When dialing out, Freeswitch/Openzap is not detecting that an analog FXO channel is disconnected and tries dialing out on the channel anyway. No error is reported. The call doesn’t timeout until a minute later. Shouldn’t Freeswitch/Openzap skip over a disconnected channel to the next connected channel?
I have configured a Sangoma A200 FXO card as a FXO span.
[span wanpipe FXO]
name => PSTN Line 1
number => 4253491059
fxo-channel => 2:3
name => PSTN Line 2
number => 4253491058
fxo-channel => 2:4
The wanpipe driver does detect and report when a CO line is connected or disconnected (in /var/log/messages), and Freeswitch/Openzap gets an event as reported in the log.
/var/log/messages: Feb 25 15:23:10 roberth-c53 kernel: wanpipe2: Module 3: FXO Line is disconnected!
FS_CLI: 2010-02-25 15:23:10.711604 [DEBUG] ozmod_analog.c:788 EVENT [ALARM_TRAP][3:1] STATE [DOWN]
/var/log/messages: Feb 25 15:23:44 roberth-c53 kernel: wanpipe2: Module 4: FXO Line is connected!
FS_CLI: 2010-02-25 15:23:44.901979 [DEBUG] ozmod_analog.c:788 EVENT [ALARM_CLEAR][3:2] STATE [DOWN]
I have the dialplan configured to use the next available port in the FXO span (there will be more than 2 channels later).
<extension name="OutgoingFXO">
<condition field="destination_number" expression="^7(\d+)$">
<action application="bridge" data="openzap/FXO/a/$1"/>
</condition>
</extension>
Here is a portion of the log when that shows dialing out on a disconnected analog FXO channel.
EXECUTE sofia/internal/5410@192.168.72.45:5060bridge(openzap/FXO/a/93491045)
2010-02-25 15:26:17.891443 [DEBUG] mod_openzap.c:366 Set codec PCMU 20ms
2010-02-25 15:26:17.891443 [DEBUG] mod_openzap.c:1257 Connect outbound channel OpenZAP/3:1/93491045
2010-02-25 15:26:17.891443 [NOTICE] switch_channel.c:642 New Channel OpenZAP/3:1/93491045 [3c8f46f5-77a8-498f-a51c-015837746cb7]
2010-02-25 15:26:17.891443 [DEBUG] mod_openzap.c:1269 (OpenZAP/3:1/93491045) State Change CS_NEW -> CS_INIT
2010-02-25 15:26:17.891443 [DEBUG] switch_core_session.c:1019 Send signal OpenZAP/3:1/93491045 [BREAK]
2010-02-25 15:26:17.891443 [DEBUG] ozmod_analog.c:59 Changing state on 3:1 from DOWN to DIALING
2010-02-25 15:26:17.891443 [WARNING] switch_core_session.c:486 OpenZAP/3:1/93491045 does not support the proxy feature, disabling.
2010-02-25 15:26:17.891443 [DEBUG] ozmod_analog.c:279 ANALOG CHANNEL thread starting.
2010-02-25 15:26:17.891443 [DEBUG] ozmod_analog.c:450 Executing state handler on 3:1 for DIALING
2010-02-25 15:26:17.891443 [DEBUG] switch_core_state_machine.c:314 (OpenZAP/3:1/93491045) Running State Change CS_INIT
2010-02-25 15:26:17.891443 [DEBUG] switch_core_state_machine.c:338 (OpenZAP/3:1/93491045) State INIT
2010-02-25 15:26:17.891443 [DEBUG] mod_openzap.c:394 (OpenZAP/3:1/93491045) State Change CS_INIT -> CS_ROUTING
2010-02-25 15:26:17.891443 [DEBUG] switch_core_session.c:1019 Send signal OpenZAP/3:1/93491045 [BREAK]
2010-02-25 15:26:17.891443 [DEBUG] switch_core_state_machine.c:338 (OpenZAP/3:1/93491045) State INIT going to sleep
2010-02-25 15:26:17.891443 [DEBUG] switch_core_state_machine.c:314 (OpenZAP/3:1/93491045) Running State Change CS_ROUTING
2010-02-25 15:26:17.891443 [DEBUG] switch_core_state_machine.c:341 (OpenZAP/3:1/93491045) State ROUTING
2010-02-25 15:26:17.891443 [DEBUG] mod_openzap.c:417 OpenZAP/3:1/93491045 CHANNEL ROUTING
2010-02-25 15:26:17.891443 [DEBUG] switch_ivr_originate.c:66 (OpenZAP/3:1/93491045) State Change CS_ROUTING -> CS_CONSUME_MEDIA
2010-02-25 15:26:17.891443 [DEBUG] switch_core_session.c:1019 Send signal OpenZAP/3:1/93491045 [BREAK]
2010-02-25 15:26:17.891443 [DEBUG] switch_core_state_machine.c:341 (OpenZAP/3:1/93491045) State ROUTING going to sleep
2010-02-25 15:26:17.891443 [DEBUG] switch_core_state_machine.c:314 (OpenZAP/3:1/93491045) Running State Change CS_CONSUME_MEDIA
2010-02-25 15:26:17.891443 [DEBUG] switch_core_state_machine.c:360 (OpenZAP/3:1/93491045) State CONSUME_MEDIA
2010-02-25 15:26:17.891443 [DEBUG] switch_core_state_machine.c:360 (OpenZAP/3:1/93491045) State CONSUME_MEDIA going to sleep
Thanks,
Robert
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org