Please post your dialplan snippet. Re POTS line requiring you to dial 9. Usually this is a PABX access code to grab the LINE e.g. to get a dial tone but 9 is not dialed. Only the numbers following 9 is actually dialed to the POTS line. Unless ... this is an unusual setup. /nandy On Mon, Nov 18, 2013 at 3:41 PM, Oren Hecht <orenhe@in.taldor.co.il> wrote:
Hi,
I'm new to freeswitch so please excuse me if I'm not using the right terms.
I have freeswitch connected to a POTS line using an FXO port, and I am trying to use it to dial out without success. The POTS line requires me to dial '9' first to get a line for dialing out, and as long as I don't press 9 it gives a 'busy' tone. I am trying to bridge an extension to freetdm port with adding a '9' prefix, but I get "Failed to open channel" and the reason is "NORMAL_CIRCUIT_CONGESTION". When I look at 'ftdm dump' I see: "last_state: BUSY".
I guess the reason for failure is that freeswitch hears the busy tone and thinks the line is not free and aborts. I also thought this is related to the early media signaling so I tried adding {ignore_early_media=true} thinking it will ignore the busy tone, but it dodn't help.
How can I tell freeswitch to ignore the busy signal and just dial the destaination number, (the '9' prefix will give it a free line)?
Thank you very much for the help, Oren Hecht.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org