Is there a way to control the domain on the presence_id? When I run `verto status` it's showing up as the internal alias. I want to be able to specify this as a different value (the external_sip_ip for example). We use this value by querying the database presence_id value in the channels table. Name Type Data State ================================================================================================= external-ipv6 profile sip:mod_sofia@[::1]:5080 RUNNING (0) external-ipv6 profile sip:mod_sofia@[::1]:5081 RUNNING (0) (TLS) 10.200.82.5 alias internal ALIASED external profile sip:mod_sofia@10.0.82.91:5080 RUNNING (0) external profile sip:mod_sofia@10.0.82.91:5081 RUNNING (0) (TLS) internal-ipv6 profile sip:mod_sofia@[::1]:5060 RUNNING (0) internal-ipv6 profile sip:mod_sofia@[::1]:5061 RUNNING (0) (TLS) internal profile sip:mod_sofia@10.0.82.91:5060 RUNNING (0) internal profile sip:mod_sofia@10.0.82.91:5061 RUNNING (0) (TLS) ================================================================================================= 4 profiles 1 alias Here is the output of `verto status` Name Type Data State ================================================================================================= default-v6 profile ws:[::1]:8081 RUNNING default-v6 profile wss:[::1]:8082 RUNNING default-v4 profile ws:0.0.0.0:8081 RUNNING default-v4 profile wss:0.0.0.0:8082 RUNNING default-v4::1rVWHg2fbA5Ydx9hAceSdKGREwY=@10.200.82.5 client 192.168.202.156:50064 CONN_REG (WSS) ================================================================================================= 2 profiles , 1 client Thanks, Danny