On 4 November 2010 02:15, GillesToo <codecomplete@free.fr> wrote:
So I was wondering if Freeswitch could run as STUN server or if someone knew of a good open-source STUN server that I could install on the same host as the Freeswitch server?
Debian has this package: scrooge:~# apt-cache show stun Package: stun Priority: optional Section: net Installed-Size: 176 Maintainer: Debian VoIP Team <pkg-voip-maintainers@lists.alioth.debian.org> Architecture: i386 Version: 0.96.dfsg-5 Depends: libc6 (>= 2.6-1), libgcc1 (>= 1:4.2-20070516), libstdc++6 (>= 4.2-20070516) Filename: pool/main/s/stun/stun_0.96.dfsg-5_i386.deb Size: 41292 MD5sum: b8d9baaddbaf74016b6a0af3bdfd8545 SHA1: 8675d417af0e2d9076e91e46a82a99e3e728d45e SHA256: ccb8fc9ad634b2ff98ebcc5d97eb2864df8a1c634109ef2fb641a7d2a2fb3a34 Description: Server daemon and test client for STUN The STUN protocol (Simple Traversal of UDP through NATs) is described in the IETF RFC 3489, available at http://www.ietf.org/rfc/rfc3489.txt. It's used to help clients behind NAT to tunnel incoming calls through. This server is the counterpart to help the client identify the NAT and have it open the proper ports for it. . Homepage: http://www.vovida.org/applications/downloads/stun/ Tag: interface::commandline, interface::daemon, network::{client,server,service,vpn}, protocol::{ip,udp,voip}, role::program, scope::utility, use::transmission === cut === Unfortunately the version in Debian/lenny seems to have this brain dead assumption that you want it to bind to exactly two different IP addresses (for increased reliability or something). I don't have any additional public IPv4 addresses to spare. At least that was the problem I encountered when I installed it before. I might have been doing something wrong. Also the home page mentioned above is useless. -- Brian May <brian@microcomaustralia.com.au>