Hi Chris, Thanks for sharing what you're doing. That's very helpful. Which AMI did you deploy from? I'm wondering what your ec2 kernel timer is set to. Thanks! Rob On Mar 3, 2010, at 11:17 AM, Chris Fowler wrote:
Hi Rob,
We run FreeSWITCH on AWS' EC2. A medium EC2 instance is happily supporting 100 Polycom users, conference bridges etc. Been running for over a year. We also use FlowRoute as our PSTN->SIP Interface, and also Skype Business SIP. Our users are scattered across the globe - so having the box sitting on AWS' network infrastructure is key to avoiding issues with latency, jitter, packet loss (i.e. I don't think we could afford the connectivity AWS gives us if we had to provision this in-house).
There were no special tricks; you do need to modify/override the following with the box's Elastic IP (EIP).
modify conf/vars.xml and update <X-PRE-PROCESS cmd="set" data="domain=<YOUR DOMAIN HERE>"/>
<X-PRE-PROCESS cmd="set" data="default_provider=sip.flowroute.com"/> <X-PRE-PROCESS cmd="set" data="default_provider_username=<USER>"/> <X-PRE-PROCESS cmd="set" data="default_provider_password=<PASS>"/> <X-PRE-PROCESS cmd="set" data="default_provider_from_domain=flowroute.com"/> <X-PRE-PROCESS cmd="set" data="default_provider_register=true"/>
<X-PRE-PROCESS cmd="set" data="bind_server_ip=<AWS EIP>"/> <X-PRE-PROCESS cmd="set" data="external_rtp_ip=<AWS EIP>"/> <X-PRE-PROCESS cmd="set" data="external_sip_ip=<AWS EIP>"/>
<X-PRE-PROCESS cmd="set" data="outbound_caller_name=<YOUR NAME>"/> <X-PRE-PROCESS cmd="set" data="outbound_caller_id=<YOUR CID>"/>
conf/sip_profiles/internal.xml <param name="aggressive-nat-detection" value="true"/> <param name="multiple-registrations" value="true"/> <param name="ext-rtp-ip" value="$${external_rtp_ip}"/> <param name="ext-sip-ip" value="$${external_sip_ip}"/> <param name="NDLB-received-in-nat-reg-contact" value="true"/> <param name="NDLB-force-rport" value="true"/> <param name="NDLB-broken-auth-hash" value="true"/> <param name="enable-timer" value="false"/>
conf/sip_profiles/external.xml <param name="aggressive-nat-detection" value="true"/> <param name="ext-rtp-ip" value="$${external_rtp_ip}"/> <param name="ext-sip-ip" value="$${external_sip_ip}"/> <param name="NDLB-force-rport" value="true"/>
conf/autoload/switch.conf.xml <param name="rtp-start-port" value="16384"/> <param name="rtp-end-port" value="32768"/>
Cheers, Chris. -- RightScale, Inc.
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Tuesday, March 02, 2010 9:05 PM To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] Virtualized FreeSWITCH
Hi all,
Is anyone running FreeSWITCH virtualized (xen or vmware) in production? I saw ec2 and xen mentioned a few places. If so, are there tips or tricks for handle timer issues which affect virtual machines in general, such as recommended divider or clocksource settings? I'm seeing funny timing issues while testing with audio recording and playback that speed up or slow down.
I have tried both paravirt and hvm. The default xen kernel has a timer of 250, so I tried to hvm instead using the stock 5.3 kernel with the 1khz timer but didn't see much improvement.
All of this was tested on 64-bit CentOS 5.3. - Physical host: Linux localhost.localdomain 2.6.18-164.11.1.el5xen #1 SMP Wed Jan 20 08:06:04 EST 2010 x86_64 x86_64 x86_64 GNU/Linux CONFIG_HZ=250 - Paravirt host: Linux localhost.localdomain 2.6.18-128.el5xen #1 SMP Wed Jan 21 11:12:42 EST 2009 x86_64 x86_64 x86_64 GNU/Linux CONFIG_HZ=250 - Hvm host: Linux localhost.localdomain 2.6.18-128.el5 #1 SMP Wed Jan 21 10:41:14 EST 2009 x86_64 x86_64 x86_64 GNU/Linux CONFIG_HZ=1000
I'm sure physical hosts are the de-facto best practice, but are virtual machines not worth it at all?
Cheers, Rob
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org