Dear users, I'm trying to figure out how this mod_distributor works. I've a few questions to help me get this going. I've defined two of my gateways in the distributor.conf.xml like this: <configuration name="distributor.conf" description="Distributor Configuration"> <lists> <list name="GWLB" total-weight="2"> <node name="OpenSIPS-A" weight="1"/> <node name="OpenSIPS-B" weight="1"/> </list> </lists> </configuration> and so when I reload the distributor from API I get the following warning: freeswitch@internal> distributor_ctl reload +ok reloaded. 2013-08-06 14:17:16.652087 [WARNING] mod_distributor.c:201 Total weight does not add up to total weight 10 So I've changed the total-weight to 10, and set weight of each node as 5. That gives the same warning as well. A Warning is fine, but as soon as I just use API to expand the list I get a proper gateway name for the first two times only and then -err starts showing up until I reload the distributor. freeswitch@internal> expand distributor GWLB OpenSIPS-A freeswitch@internal> expand distributor GWLB OpenSIPS-B freeswitch@internal> expand distributor GWLB -err freeswitch@internal> expand distributor GWLB -err freeswitch@internal> The last question is regarding use of this distributor from LUA script. I call in the distributor like this from my LUA. session = freeswitch.Session("{ignore_early_media=true,origination_caller_id_number="..outbound_cli.."}sofia/gateway/${distributor(GWLB)}/".. phone_number); and that gives a straight error: [ERR] mod_sofia.c:4668 Invalid Gateway '%{distributor(GWLB)}' I hope somebody can share their knowledge on this module and help me move forward with my project. Best Regards, Sammy