Just a little update for you guys. I have jumped from debian to centos did a full reinstall + Raid 1 + DB in Ram. And was able to get 78 Simult. Calls at only 10 % CPU so there is a huge difference so far from 120 % on debian :\. Call quality has improved , local lan call quality has rised , G729 Licenses working again thanks Brian West !!!. I will now start to deploy our IVRs using ESL to see if i can offload some of the load. Regards A/T 2011/4/27 Paul Cupis <paul@cupis.co.uk>
On 27/04/11 01:24, Ariel Monaco wrote:
We had high CPU utilization peaks in the past, which lead to some audio issues (clipping). We were using debian at that time, which was a customer-side requirement.
I'm not a kernel guru but I remember this had something to do with kernel timer cycles and the issue was address by adding "divider=10" or "divider=100" as a kernel's boot loader option.
Interesting. This kernel option is designed to reduce the valy of CONFIG_HZ at run=time, so if you have a 1000Hz kernel, setting divider=10 at boot time will effectively give you a 100Hz kernel.
This seems to fly in the face of other recommendations on this kernel setting!
Debian default kernel sets CONFIG_HZ=100 CentOS default kernel sets CONFIG_HZ=1000
Regards,
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org