Hi Neo, Check the DTMF settings of SPA3000. The preferred mode is RFC2833. /Nandy On Wed, Jun 18, 2014 at 3:54 AM, Neo Haux <neo.haux@gmx.com> wrote:
Hi all,
I have an issue to send DTMF to an external extension (goes through my PSTN)
My actual config is:
|--|FXS-phone FS------LAN-----CISCO SPA3000--| |--| FXO-to-pstn
Either I make a call from FXS of a soft SIP phone in my LAN the DTMF I send are not recognized at all by the number I call.
When I send the DTMF I see in the console:
freeswitch@internal> 2014-06-17 15:19:59.846809 [DEBUG] switch_rtp.c:5788 RTP RECV DTMF 1:1600 2014-06-17 15:19:59.846809 [DEBUG] switch_channel.c:486 RECV DTMF 1:1600 2014-06-17 15:19:59.846809 [DEBUG] switch_ivr_bridge.c:470 Send signal sofia/internal/5142252398@192.168.0.102:5061 [BREAK] 2014-06-17 15:19:59.846809 [DEBUG] switch_rtp.c:4314 Send start packet for [1] ts=1562418126 dur=160/160/1600 seq=48292 lw=1562418126 2014-06-17 15:19:59.866877 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=1562418126 dur=320/320/1600 seq=48293 lw=1562418286 2014-06-17 15:19:59.886848 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=1562418126 dur=480/480/1600 seq=48294 lw=1562418446 2014-06-17 15:19:59.906840 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=1562418126 dur=640/640/1600 seq=48295 lw=1562418606 2014-06-17 15:19:59.926964 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=1562418126 dur=800/800/1600 seq=48296 lw=1562418766 2014-06-17 15:19:59.946846 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=1562418126 dur=960/960/1600 seq=48297 lw=1562418926 2014-06-17 15:19:59.966838 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=1562418126 dur=1120/1120/1600 seq=48298 lw=1562419086 2014-06-17 15:19:59.986853 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=1562418126 dur=1280/1280/1600 seq=48299 lw=1562419246 2014-06-17 15:20:00.006849 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=1562418126 dur=1440/1440/1600 seq=48300 lw=1562419406 2014-06-17 15:20:00.026839 [DEBUG] switch_rtp.c:4213 Send end packet for [1] ts=1562418126 dur=1600/1600/1600 seq=48301 lw=1562419406 2014-06-17 15:20:00.026839 [DEBUG] switch_rtp.c:4213 Send end packet for [1] ts=1562418126 dur=1600/1600/1600 seq=48302 lw=1562419406 2014-06-17 15:20:00.046848 [DEBUG] switch_rtp.c:4213 Send end packet for [1] ts=1562418126 dur=1600/1600/1600 seq=48303 lw=1562419406
freeswitch@internal> freeswitch@internal> freeswitch@internal> freeswitch@internal> freeswitch@internal> freeswitch@internal> freeswitch@internal> freeswitch@internal> 2014-06-17 15:20:04.926811 [DEBUG] switch_rtp.c:5788 RTP RECV DTMF 1:1600 2014-06-17 15:20:04.926811 [DEBUG] switch_channel.c:486 RECV DTMF 1:1600 2014-06-17 15:20:04.926811 [DEBUG] switch_ivr_bridge.c:470 Send signal sofia/internal/5142252398@192.168.0.102:5061 [BREAK] 2014-06-17 15:20:04.926811 [DEBUG] switch_rtp.c:4314 Send start packet for [1] ts=1562459406 dur=160/160/1600 seq=48541 lw=1562459406 2014-06-17 15:20:04.946882 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=1562459406 dur=320/320/1600 seq=48542 lw=1562459566 2014-06-17 15:20:04.966839 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=1562459406 dur=480/480/1600 seq=48543 lw=1562459726 2014-06-17 15:20:04.986837 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=1562459406 dur=640/640/1600 seq=48544 lw=1562459886 2014-06-17 15:20:05.006847 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=1562459406 dur=800/800/1600 seq=48545 lw=1562460046 2014-06-17 15:20:05.026846 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=1562459406 dur=960/960/1600 seq=48546 lw=1562460206 2014-06-17 15:20:05.046839 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=1562459406 dur=1120/1120/1600 seq=48547 lw=1562460366 2014-06-17 15:20:05.066839 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=1562459406 dur=1280/1280/1600 seq=48548 lw=1562460526 2014-06-17 15:20:05.086839 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=1562459406 dur=1440/1440/1600 seq=48549 lw=1562460686 2014-06-17 15:20:05.106839 [DEBUG] switch_rtp.c:4213 Send end packet for [1] ts=1562459406 dur=1600/1600/1600 seq=48550 lw=1562460686 2014-06-17 15:20:05.106839 [DEBUG] switch_rtp.c:4213 Send end packet for [1] ts=1562459406 dur=1600/1600/1600 seq=48551 lw=1562460686 2014-06-17 15:20:05.126850 [DEBUG] switch_rtp.c:4213 Send end packet for [1] ts=1562459406 dur=1600/1600/1600 seq=48552 lw=1562460686
freeswitch@internal> freeswitch@internal> freeswitch@internal>
When I receive a call and the caller click on digits (send me DTMF) I see this in the console:
freeswitch@internal> 2014-06-17 15:18:06.466803 [DEBUG] switch_rtp.c:5788 RTP RECV DTMF 1:1604 2014-06-17 15:18:06.466803 [DEBUG] switch_channel.c:486 RECV DTMF 1:1604 2014-06-17 15:18:06.466803 [DEBUG] switch_ivr_bridge.c:470 Send signal sofia/internal/sip:1000@192.168.0.102:5060 [BREAK] 2014-06-17 15:18:06.486822 [DEBUG] switch_rtp.c:4314 Send start packet for [1] ts=407942050 dur=240/240/1604 seq=40146 lw=407942050 2014-06-17 15:18:06.506818 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=407942050 dur=480/480/1604 seq=40147 lw=407942290 2014-06-17 15:18:06.546821 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=407942050 dur=720/720/1604 seq=40148 lw=407942530 2014-06-17 15:18:06.566821 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=407942050 dur=960/960/1604 seq=40149 lw=407942770 2014-06-17 15:18:06.606824 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=407942050 dur=1200/1200/1604 seq=40150 lw=407943010 2014-06-17 15:18:06.626820 [DEBUG] switch_rtp.c:4213 Send middle packet for [1] ts=407942050 dur=1440/1440/1604 seq=40151 lw=407943250 2014-06-17 15:18:06.666823 [DEBUG] switch_rtp.c:4213 Send end packet for [1] ts=407942050 dur=1680/1680/1604 seq=40152 lw=407943250 2014-06-17 15:18:06.666823 [DEBUG] switch_rtp.c:4213 Send end packet for [1] ts=407942050 dur=1680/1680/1604 seq=40153 lw=407943250 2014-06-17 15:18:06.666823 [DEBUG] switch_rtp.c:4213 Send end packet for [1] ts=407942050 dur=1680/1680/1604 seq=40154 lw=407943250
I have no isea where to look. Is it a config to change within FS or SPA3000 ? What type of conf should I check ?
In the past I had a Digium card+ asterisk and I had never had an issue with dtmf since the default config did work. I am new to FS so any idea is welcome.
Thanks
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org