There is no way to disable that function currently. Pull requests are accepted, Stop by at the next office hours meeting next week and discuss it with us. /b On Thu, Jul 14, 2022 at 5:37 AM Antony Stone < Antony.Stone@freeswitch.open.source.it> wrote:
On Thursday 14 July 2022 at 02:12:54, TTT wrote:
That sounds like the cause; this machine has no route to the internet.
Is there a way to skip this test?
I, too, would very much like to see an option which can be passed to FreeSwitch to tell it not to try "anything fancy" involving uPnP, NATPMP, STUN etc, and simply accept the network addresses you've specified in the configuration file.
This would speed up startup time, and also ensure that FreeSwitch did what you expected it to from the config file, not what it thinks it should do instead.
Those who want it to be clever and work things out for itself can continue to use the current default mode of operation, of course.
Antony.
From: Brian West [mailto:brian@freeswitch.com] Sent: Wednesday, July 13, 2022 6:04 PM To: lists@telium.io Cc: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Speeding up FreeSWITCH load time
switch_find_local_ip in switch_utils.c
It's trying to figure out which of your local ipv4 and ipv6 addresses can reach the internet.
On Wed, Jul 13, 2022 at 4:59 PM TTT <lists@telium.io <mailto:lists@telium.io> > wrote:
What domain name does the code do a lookup for? Perhaps it’s not resolving. But I’ll check general DNS lookups too.,
From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> ] On Behalf Of Brian West Sent: Wednesday, July 13, 2022 1:56 PM To: Avi Marcus <avi@avimarcus.net <mailto:avi@avimarcus.net> > Cc: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org> > Subject: Re: [Freeswitch-users] Speeding up FreeSWITCH load time
We do a look up against a DNS server in the code to check, maybe double check that isn't causing an issue?
On Wed, Jul 13, 2022 at 12:07 PM Avi Marcus <avi@avimarcus.net <mailto:avi@avimarcus.net> > wrote:
You can first try looking at the logs at startup time to see what's taking so long, in freeswitch.log
On Wed, Jul 13, 2022 at 7:33 PM TTT <lists@telium.io <mailto:lists@telium.io> > wrote:
I checked with “ps ax” and confirmed -nonat is running. But I’ll investigate further using strace, and reload of pieces of the config., to see where the time is going.
I’m using HAfs (https://telium.io/hafs) to do the clustering (sensing, control, failover, syncing, IP movement, etc) and that works well, I just want to speed up the FreeSWITCH recovery speed.
Thanks
From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> ] On Behalf Of Ken Rice Sent: Tuesday, July 12, 2022 9:05 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org> > Subject: Re: [Freeswitch-users] Speeding up FreeSWITCH load time
are you sure -nonat is taking effect? thats about the only thing that would take any tome getting freeswitch startes up. without -nonat it takes many seconds for upnp/nat-pmp to timeout.
the only other way to avoid media loss is to do a full HA setup with proper floating IP and fencing. theres agoos bit of info on this on the wiki and various places on the web
On Jul 12, 2022, at 08:21, TTT <lists@telium.io <mailto:lists@telium.io>
wrote:
I’m looking at a crash recovery scenario, and during this startup period the calls in progress have no audio. (And input media bypass is not an option due to topology)
From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Gregor Nanger Sent: Tuesday, July 12, 2022 8:58 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org> > Subject: Re: [Freeswitch-users] Speeding up FreeSWITCH load time
Just for info. Why is this a problem.
On Tue, 12 Jul 2022, 14:54 TTT, <lists@telium.io <mailto:lists@telium.io>
wrote:
I found that the FreeSWITCH systemd service file already contains a –nonat option. Maybe my expectations are out of line, should it take 10 seconds for FreeSWITCH to fully start? My experience is with Asterisk, which is less than half of that to start.
If that’s normal, how can I diagnose what is consuming the start time?
Thanks
From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> ] On Behalf Of Avi Marcus Sent: Monday, July 11, 2022 3:17 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org> > Subject: Re: [Freeswitch-users] Speeding up FreeSWITCH load time
It's probably taking time to discover NAT.
If you have a direct public IP and don't require NAT, you can instruct freeswitch to skip this step:
To turn it off use "-nonat" to start freeswitch. If you still prefer to have NAT detection, but avoiding the port mapping using UPnP/NAT-PMP you can use "-nonatmap".
via: https://freeswitch.org/confluence/display/FREESWITCH/Auto+Nat
-Avi Marcus
On Mon, Jul 11, 2022 at 4:48 AM TTT <lists@telium.io <mailto:lists@telium.io> > wrote:
Is there a guide on how to speed FS loading times? FS takes 10+ seconds to start which seems long (for a very simple configuration).
_________________________________________________________________________
_________________________________________________________________________
The FreeSWITCH project is sponsored by SignalWire https://signalwire.com Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services. Build your next product on our scalable cloud platform.
Join our online community to chat in real time https://signalwire.community
Professional FreeSWITCH Services sales@freeswitch.com https://freeswitch.com
Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users https://freeswitch.com
-- Brian West | Co-founder and Developer Need Commercial support? email sales@freeswitch.com FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045 <https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g> Email: brian@freeswitch.com Mobile: 918-424-9378 Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/> [image: https://www.facebook.com/signalwireinc?src=email] <https://www.facebook.com/freeswitch> [image: https://twitter.com/freeswitch] <https://twitter.com/freeswitch>