This is correct, so registrations have a timeout. If your timeout is long, and you allow multiple registrations, it will keep trying to call the bad registration until timeout. Our middle-ground setting is to have a setting that specifies only one reg per ip/port. Anything beyond that is just not possible with the protocol, at least when using udp. If you are using tcp for the registrations it *might* clear that down properly in these cases. So you have 3 ways to address this. Only allow 1 registration per user, only allow 1 registration per contact, allow all the registrations and expect this issue until timeout (set at the length you can tollerate), and a possible 4th of tcp may address this. Mike On Feb 10, 2010, at 11:13 AM, Jerry Richards wrote:
I am using Bria Pro softphones, but it is possible that the PC was disconnected before a restart. Any phone does not necessarily send unregister, for example if there is a power outage or it is disconnected from the network. Anyway, I'll just try setting multiple-registrations to contact as you suggest.
Thanks, Jerry