Get a pcap of both the working and the failing calls and compare them in wireshark. Also, compare the console output of the working and the failing calls. Look for differences. You may see a clue. If you need assistance then pastebin the output and we'll all have a look. -MC On Thu, Feb 24, 2011 at 4:59 PM, Mac <mbsip@gazeta.pl> wrote:
Okay i've found sth.
I was trying to achieve that by using <action application="bridge" data="{execute_on_answer=start_dtmf}sofia/gateway/OPERATOR_2/$0"/"/> and it failes to convert dtmf
While using <action application="bridge" data="{execute_on_answer=start_dtmf}sofia/$0@IP_ADDR_OF_OPERATOR_2"/> and it was success.
Is that mean that i my sip profile need to be adjusted somehow?
Thx, Mac
Thanks for feedback
Inbound leg has RFC2833, outbound has inband dtmf, so i've changed a part of public.xml as you mentioned: <action application="set" data="proxy_media=false"/> <action application="set" data="bypass_media=false"/> <!--<action application="start_dtmf"/>--> <action application="bridge" data="{execute_on_answer=start_dtmf}sofia/OPERATOR_2//$0"/>
Unfortunately it doesn't work.
Thx, Mac
you need to run the start_dtmf() application on the leg that has inband DTMF
if its the inbound leg, add it to the DP <action application="start_dtmf"/>
if it's the outbound leg you need to set it in execute_on_answer in the bridge line
<action application="bridge" data="{execute_on_answer=start_dtmf}sofia/OPERATOR_2/46111223344"/>
On Thu, Feb 24, 2011 at 4:58 PM, Mac <mbsip@gazeta.pl> wrote:
Hi,
Here they are: http://pastebin.freeswitch.org/15473
Thanks, Mac
Get a debug-level log with siptrace enabled and paste it so we can see what's going on.
-Steve
On 22 February 2011 01:16, Mac <mbsip@gazeta.pl> wrote:
Hello,
Could somebody give me a hint?
Thanks, Mac
> Hi Steven, > > There is much better :) > I have different SDPs right now. The one is with rtpmap:101 > telephone-event/8000 (leg that is working with RFC2833), the
opposite
> one incorporates a=rtpmap:101 telephone-event/8000 in INVITE SDP and > pure codec rtpmaps. > There is rtp.p_type == 101 working only on the left side. I cannot > find any rtp.p_type == 101 on thark in opposide side which is okay. > But the problem still persists. > > Once setting my UA to work with Inband DTMF everything works fine. > > Thanks, > Mac > > 2011/2/20 Steven Ayre <steveayre@gmail.com>: >> <action application="set" data="proxy_media=true"/> >> >> As indicated by the error, this is the problem. "proxy passthrough". In >> proxy mode you pass the media straight through (passthrough). You can't >> process passthrough media, such as is needed to mix in inband dtmf. >> Use proxy_media=false and bypass_media=false. That's actually the >> default so >> unless you're setting either to true in the sip profile, you can remove >> those lines from the dialplan completely. >> Steve on iPhone >> On 20 Feb 2011, at 18:51, Mac <mbsip@gazeta.pl> wrote: >> >> action application="set" data="proxy_media=true"/> >> >> _______________________________________________ >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> >> UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> >> >
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org