Hi, I am working on Dtmf signal on barging I have added these line to default.xml <extension name="global" continue="true"> <condition> <action application="info"/> <action application="db" data="insert/spymap/${caller_id_number}/${uuid}"/> <action application="db" data="insert/last_dial/${caller_id_number}/${destination_number}"/> <action application="db" data="insert/last_dial/global/${uuid}"/> </condition> </extension> <extension name="eavesdrop"> <condition field="destination_number" expression="^88(.*)$|^\*0(.*)$"> <action application="answer"/> <action application="eavesdrop" data="${db(select/spymap/$1)}"/> </condition> </extension> i eavesdrop on extension 1003 by dialing 881003 1003 is connected to mobile no but when i dial 881003 it get hangup i have attached the full default.xml separately.barging is not working through default.xml And another thing DTMF signal is *not working* through* even socket api command * I tried in conference also when we manually done in softphone it work . when i press the # button it hangup and * for mute etc. it works fine but when i pass these through event socket it does not work why????? if i pass the DTMF digits in api command it receive a beep sound but the process is not done. *i tried i n conference the output is :* api conference 3001 dtmf 15 # Content-Type: api/response Content-Length: 16 OK sent # to 15 15 is member id # is to hangup but it does not get hangup through api command * In barging also same problem * api uuid_send_dtmf f7666a65-5fc4-4199-bb6c-95a5e22d4515 "3210*" Content-Type: api/response Content-Length: 14 -ERR no reply I get the beep sound and there is no process done what should be done please guide me. -- Warm Regards, N.Baskar