Sure, here is what worked for me using Putty First: enable mod_event_socket module in modules.conf.xml (It is enabled by default ) <load module="mod_event_socket"/> Next: configure in autoload_configs/event_socket.conf.xml as follows: <settings> <param name="nat-map" value="false"/> <param name="listen-ip" value="192.168.0.15"/> <param name="listen-port" value="8021"/> <param name="password" value="myPassword"/> <param name="apply-inbound-acl" value="lan"/> </settings> Then: configure Putty client as follows Set Putty to talk to server running FS over port 8021 using telnet protocol, open session, Finally: Open a telnet session and: Send blank line, Send "auth yourPassword", Send blank line. Receive "Ok" Bert -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of mazilo Sent: Sunday, February 13, 2011 7:16 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Possible to communicate with FS using event_socket without ESL? Bert Jones wrote:
Further I can talk to the server, authenticate and make calls using telnet, I am just curious how you do this. Do care to explain how to do this using telnet?
----- don't and stop are the ONLY two 4-letter words considered offensive to men, but not when used together. -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/Possible-to-communicate-with-F S-using-event-socket-without-ESL-tp6020307p6020712.html Sent from the freeswitch-users mailing list archive at Nabble.com. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org