Im having trouble with getting freetdm to work with a openvox a400p with 4 fxo modules using the latest freeswitch from GIT dahdi installs fine and 'dahdi_hardware' lists it as a TDM400P When I configure freetdm.conf only I can start freeswitch and do a ftdm dump and it displays my span with 4 channels When I configure freetdm.conf.xml freeswitch segfaults on startup I don't know if I need them but ftmod_analog.so and ftmod_zt.so have been built this is my freetdm.conf: [general] [span zt myFX0] fxo-channel => 1 fxo-channel => 2 fxo-channel => 3 fxo-channel => 4 This is my freetdm.conf.xml: <configuration name="freetdm.conf" description="FreeTDM Configuration"> <settings> <param name="debug" value="6"/> <!--<param name="hold-music" value="$${moh_uri}"/>--> <!-- Analog global options (they apply to all spans) Remember you can only choose between either call-swap or 3-way, not both! --> <!--<param name="enable-analog-option" value="call-swap"/>--> <!--<param name="enable-analog-option" value="3-way"/>--> </settings> <!-- Sample analog configuration (The analog_spans tag is for ftmod_analog) --> <analog_spans> <!-- The span name must match the name in your freetdm.conf --> <span name="myFXO"> <!--<param name="hold-music" value="$${moh_uri}"/>--> <param name="dialplan" value="XML"/> <param name="context" value="Incoming-FXO"/> <param name="tonegroup" value="us"/> <param name="enable_callerid" value="true"/> <param name="enable-analog-option" value="call-swap"/> <!--<param name="enable-analog-option" value="3-way"/>--> </span> </analog_spans> </configuration> Any idea what I am doing wrong? -- Jesse Cloutier Network Administrator Cronomagic Canada 5143411579 x210 jesse@cronomagic.com