Hi All, First of all, I'm a relatively new user of FreeSWITCH so, please bear with me if I'm asking a silly question. I have users registering through multiple kamailio loadbalancer/registrars, so when we build a bridge command to multiple local users we send the initial invite(s) to the kamailio lookup server which then responds with a 302 redirect message specifying the contact details of the user. What I am trying to do is get FreeSWITCH to call a particular user via a particular loadbalancer based on information recieved in the 302 redirect. From what I have read in the archives, we can achieve this with the fs_path directive on the bridge command. However, how/where do I specify the fs_path in the contact header in the 302 redirect in such a manner that FreeSWITCH will honour the fs_path directive. I originally tried setting a fs_path parameter in the contact of the 302 redirect message, something like the following: Contact: <sip:subscriber@1.2.3.4:5678;rinstance=9af71926212a25cf;transport=UDP;received=sip:5.6.7.8:9012;fs_path=sip:1.2.3.5> However, FreeSWITCH ignores the fs_path directive here and attempts to send this call directly to 1.2.3.4, instead of sending it via 1.2.3.5. Is this at all possible using the enterprise originate (:_: seperator) feature of the bridge command? We're attempting this with FreeSWITCH v 1.4.20 ("official" rpm packages from the repo) Any info/tips/suggestions/beatings much appreciate :) Thanks