Hi guys, I have a strange problem. I am trying to use the uuid_send_dtmf command to send DTMF tones to a call leg initiated by Level3 (my PSTN connection provider). The tones are *8954. This is a signal to the provider to transfer this call to another PSTN destination. It seems that the provider receives *8 but nothing after that. I tried putting delays between the digits with a "w" and it did not help. After *8 nothing is sent. When the call is connected to another call and the other caller manually presses the same digits, everything works fine. But for some reason it seems that FreeSWITCH command stops sending after the first 2 digits. In the sip profile dtmf type is set to rfc2833 <param name="dtmf-type" value="rfc2833"/> Any ideas? Thank you *Oleg*