I upgraded a freeswitch setup from 1.0.4 to 1.0.6 yesterday, and also upgraded my wanpipe drivers from 3.4.9 to 3.5.10. I am using openzap with a sangoma card. Before the upgrade, the following stanza would correctly send a caller to a mod_event_socket-based application that I have running on another machine and that caller's dtmf would flow through to the app: <extension name="Kevin_test"> <condition field="destination_number" expression="^XXXXXXXXXX$"> <action application="set" data="ringback=${us-ring}"/> <action application="set" data="transfer_ringback=$${hold_music}"/> <action application="bridge" data="sofia/internal/5000@prod.XXXXXXX.com"/> </condition> </extension> After the upgrade, everything but inbound dtmf works as it should, but the only way that I can get inbound dtmf to work is by adding <action application="start_dtmf"/> to the stanza. This is not ideal and I would like to go back to not using in-band dtmf if possible. In my log files, I see absolutely no dtmf being registered when a caller calls in. However, if someone calls out from a desk phone and then transfers the person that they called to sofia/internal/5000@prod.XXXXXXX.com, dtmf works just fine. Any ideas? Thanks! Kevin